1-Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Essam Ahmed, Hagar AReyad,Naser A. Alsaleh, Ibrahim Albaijan,A Novel Friction Stir DepositionTechnique toRefill Keyhole ofFriction Stir Spot Welded AA6082-T6 DissimilarJoints ofDifferent Sheet Thicknesses,Materials2022,15, 6799.
https://doi.org/10.3390/ma15196799

2-.Ibrahim Albaijan, Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman,Kamel Touileb,Mohamed I. A. Habbaand Ramy A. Fouad,Optimization of BobbinTool Friction Stir ProcessingParameters of AA1050 Using Response Surface
Methodology,Materials2022, 15, 6886.https://doi.org/10.3390/ma15196886

3-.Sabbah Ataya, Mohamed M. El-Sayed Seleman, Fahamsyah H. Latief, Mohamed
M. Z. Ahmed, Khalil Hajlaoui, Yousef G. Y. Elshaghouland Mohamed I. A. Habba,Microstructure andMechanical Properties of AZ91 Rein-Forcedwith High Volume Fraction of Oriented Short Carbon Fibers,Materials2022, 15, 4818.
https://doi.org/10.3390/ma15144818

4- Sabbah Ataya, Mohamed M. El-Sayed Seleman, Fahamsyah H. Latief, Mohamed
M. Z. Ahmed, Khalil Hajlaoui, Ahmed M. Soliman, Naser A. Alsaleh and Mohamed
I. A. Habba, Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short
Carbon Fibers, Materials 2022, 15, 4841. https://doi.org/10.3390/ma15144841

5-. Hamouda M Mousa, Mahmoud Hamdy, Mohamed A Yassin, Mohamed M ElSayed Seleman, GT Abdel-Jaber, Characterization of nanofiber composite
membrane for high water flux and antibacterial properties, Colloids and Surfaces A:
Physicochemical and Engineering Aspects, Volume 651, 2022, 129655.
https://doi.org/10.1016/j.colsurfa.2022.129655

6-. Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman, Rana G. Eid, Ibrahim
Albaijan and Kamel Touileb, The Influence of Tool Pin Geometry and Speed on the
Mechanical Properties of the Bobbin Tool Friction Stir Processed AA1050, Materials
2022, 15, 4684. https://doi.org/10.3390/ma15134684

7-. Mohamed M.Z. Ahmed, Mohamed M. El-Sayed Seleman, Rana G. Eid, M.F.
Zawrah, Production of AA1050/silica fume composite by bobbin tool-friction stir
processing: Microstructure, composition and mechanical properties, CIRP Journal of
Manufacturing Science and Technology, 38 (2022) 801–812.
https://doi.org/10.1016/j.cirpj.2022.07.002

8-. Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Essam Ahmed, Hagar A
Reyad, Kamel Touileb, Ibrahim Albaijan, Friction Stir Spot Welding of Different
Thickness Sheets of Aluminum Alloy AA6082-T6. Materials 2022, 15, 2971.
https://doi.org/10.3390/ma15092971

9-. Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed MZ Ahmed, Ahmed
MM Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed
IA Habba, The Additive Manufacturing of Aluminum Matrix Nano Al2O3
Composites Produced via Friction Stir Deposition Using Different Initial Material
Conditions. Materials 2022, 15, 2926. https://doi.org/10.3390/ma15082926

10-. Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Kamel Touileb, Ibrahim
Albaijan, Mohamed IA Habba, Microstructure, Crystallographic Texture, and
Mechanical Properties of Friction Stir Welded Mild Steel for Shipbuilding
Applications. Materials 2022, 15, 2905. https://doi.org/10.3390/ma15082905

11-. Mohamed MZ Ahmed, Kamel Touileb, Mohamed M El-Sayed Seleman, Ibrahim
Albaijan, Mohamed IA Habba, Bobbin Tool Friction Stir Welding of Aluminum:
Parameters Optimization Using Taguchi Experimental Design. Materials 2022, 15,
2771. https://doi.org/10.3390/ma15082771

12. Mohamed M El-Sayed Seleman, Mohamed M Z Ahmed, Rashad M Ramadan,
Basant A Zaki, Effect of FSW Parameters on The Microstructure and Mechanical
Properties of T-joints between Dissimilar Al-Alloys. International Journal of
Integrated Engineering, Vol. 14 No. 1 (2022).
https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/6915

13. Sabbah Ataya, Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Khalil
Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef GY Elshaghoul,
Mohamed IA Habba, Effective Range of FSSW Parameters for High Load-Carrying
Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints. Materials 2022, 15,
1394. https://doi.org/10.3390/ma15041394

14. Ali S Hammad, Mohamed Zaky, Hong Lu, adel B elshabasy, Bandar Alzahrani,
Mohamed M El-Sayed Seleman, Yongquan Zhang, Abla El-Megharbel, Mechanical
properties of stationary shoulder friction stir welded Aluminum alloys AA7075-
T651, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of
Mechanical Engineering Science, January 2022.
https://doi.org/10.1177/09544062211070716

15. Mohamed M. El-Sayed Seleman, A.A.El-Kheshen, Mohamed F.Raslan,Rasha H.
Shoeir, Glass production using tailing of upgraded rare metal mineralization, Abu
Rusheid area-Egypt for nuclear waste immobilization, Ceramics International, 48, 1,
2022, 569-577, https://doi.org/10.1016/j.ceramint.2021.09.135.

16. Mohamed M. Z. Ahmed, Khalil Hajlaoui, Mohamed M. El-Sayed Seleman,
Mahmoud F. Elkady , Sabbah Ataya, Fahamsyah H. Latief and Mohamed I. A.
Habba, Microstructure and Mechanical Properties of Friction Stir Welded 2205
Duplex Stainless Steel Butt Joints, Materials 2021, 14(21), 6640;
https://doi.org/10.3390/ma14216640

17. Mohamed M. Z. Ahmed , Mahmoud A. Abdu Abdul-Maksoud, Mohamed M. ElSayed Seleman, Adel M. A. Mohamed, Effect of dwelling time and plunge depth on
the joint properties of the dissimilar friction stir spot welded aluminum and steel,
Journal of Engineering Research, Kuwait University, 2021 DOI:
https://doi.org/10.36909/jer.11367

18. Adel Mohamed, Hosam Hasan, Mohamed M El-Sayed Seleman, Essam Ahmed,
Sayed M Saleh, Rehab M El-Maghraby, Performance of Sprayed PVDF-Al2O3
Composite Coating for Industrial and Civil Applications, Materials 2021, 14(21),
6358; https://doi.org/10.3390/ma14216358

19. Bandar Alzahrani, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed,
Ebtessam Elfishawy, Adham MZ Ahmed, Kamel Touileb, Nabil Jouini, Mohamed IA
Habba, The Applicability of Die Cast A356 Alloy to Additive Friction Stir
Deposition at Various Feeding Speeds, Materials 2021, 14(20), 6018;
https://doi.org/10.3390/ma14206018

20. Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Ebtessam Elfishawy,
Bandar Alzahrani, Kamel Touileb, Mohamed IA Habba, The Effect of Temper
Condition and Feeding Speed on the Additive Manufacturing of AA2011 Parts Using
Friction Stir Deposition, Materials 2021, 14(21), 6396;
https://doi.org/10.3390/ma14216396

21. Mohamed M.El-Sayed Seleman, A.A.El-Kheshen, Mohamed F.Raslan,Rasha H.
Shoeir, Glass production using tailing of upgraded rare metal mineralization, Abu
Rusheid area – Egypt for nuclear waste immobilization, Ceramics International,
2021, https://doi.org/10.1016/j.ceramint.2021.09.135.

22. Dina M Fouad, Waleed H El-Garaihy, Mohamed MZ Ahmed, Ibrahim Albaijan,
Mohamed M. El-Sayed Seleman, Hanadi G Salem, Grain Structure Evolution and
Mechanical Properties of Multi-Channel Spiral Twist Extruded AA5083, Metals
2021, 11(8), 1276; https://doi.org/10.3390/met11081276

23. Mohamed MZ Ahmed, Mohamed IA Habba, Mohamed M El-Sayed Seleman,
Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily, Bobbin
Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process
Parameters on Temperature Distribution and Joints’ Properties, Materials 2021,
14(16), 4585; https://doi.org/10.3390/ma14164585

24. Mohamed M. Z. Ahmed, Khaled A. Abdelazem, Mohamed M. El-Sayed Seleman,
Bandar Alzahrani, Kamel Touileb, Nabil Jouini, Ismail G. El-Batanony, and Hussein
M. Abd El-Aziz, Friction Stir Welding of 2205 Duplex Stainless Steel: Feasibility of
Butt Joint Groove Filling in Comparison to Gas Tungsten Arc Welding, Materials
2021, 14 (16), 4597; https://doi.org/10.3390/ma14164597

25. Ahmed, M.M.Z.; Jouini, N.; Alzahrani, B.; Mohamed M. El-Sayed Seleman;
Jhaheen, M. Dissimilar Friction Stir Welding of AA2024 and AISI 1018:
Microstructure and Mechanical Properties, Metals 2021, 11(2), 330;
https://doi.org/10.3390/met11020330

26. Ahmed, M.M.Z.; Habba, M.I.A.; Jouini, N.; Alzahrani, B.; Mohamed M. El-Sayed
Seleman; El-Nikhaily, A. Bobbin Tool Friction Stir Welding of Aluminum Using
Different Tool Pin Geometries: Mathematical Models for the Heat Generation,
Metals 2021, 11(3), 438; https://doi.org/10.3390/met11030438

27. Ahmed, M.M.Z.; Ataya, S.; Mohamed M. El-Sayed Seleman; Mahdy, A.M.A.;
Alsaleh, N.A.; Ahmed, E. Heat Input and Mechanical Properties Investigation of
Friction Stir Welded AA5083/AA5754 and AA5083/AA7020, Metals 2021, 11(1),
68; https://doi.org/10.3390/met11010068

28. Ahmed, M.M.; Mohamed M. El-Sayed Seleman; Zidan, Z.A.; Ramadan, R.M.;
Ataya, S.; Alsaleh, N.A. Microstructure and Mechanical Properties of Dissimilar
Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints, Metals 2021, 11(1),
128; https://doi.org/10.3390/met11010128

29. Ahmed, M.M.Z.; Ataya, S.; Mohamed M. El-Sayed Seleman; Allam, T.; Alsaleh,
N.A.; Ahmed, E. Grain Structure, Crystallographic Texture, and Hardening Behavior
of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14, Metals 2021, 11(2),
181; https://doi.org/10.3390/met11020181

30. M.M.Z. Ahmed, Ahmed Elnaml, Mostafa Shazly and M. M. El-Sayed Seleman, the
effect of top surface lubrication on the friction stir welding of polycarbonate sheets,
International Polymer Processing, vol. 36, no. 1, 2021, pp. 94-102.,
https://doi.org/10.1515/ipp-2020-3991

31. Mohamed M. El-Sayed Seleman, Amany A. El-kheshen, Sherif Kharbish and
Wafaa R. Ebrahim, Utilization of cement kiln dust and some raw materials for
preparation of borosilic,ate glass, Interceram-International Ceramic Review,
69, pages 26–33 (2020), https://doi.org/10.1007/s42411-020-0426-8

32. M.M.Z. Ahmed, Mohamed M. El-Sayed Seleman, Mostafa Shazly, Moataz M.
Attallah, Essam Ahmed, Microstructural Development and Mechanical Properties of
Friction Stir Welded Ferritic Stainless Steel AISI 409, Journal of Materials
Engineering and Performance, 28, 6391–6406 (2019),
https://doi.org/10.1007/s11665-019-04365-9

33. Hoda Abd El-Azim, Mohamed M. El-Sayed Seleman, Eman M. Saad, Applicability
of Water-spray Electric Arc Furnace Steel Slag for Removal of Cd and Mn Ions From
Aqueous Solutions and Industrial Waste Waters, Journal of Environmental
Chemical Engineering, Volume 7, Issue 2, April 2019, 102915,
https://doi.org/10.1016/j.jece.2019.102915

34. Sabbah Ataya, Naser A. Alsaleh, M. M. El-Sayed Seleman, Strength and Wear
Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers, Acta Metall. Sin.
(Engl. Lett.) 32, 31-40 (2019), https://doi.org/10.1007/s40195-018-0771-z

35. D.M. Fouad, W.H. El-Garaihy, M.M.Z. Ahmed, M.M. El-Sayed Seleman, H.G.
Salem, Influence of multi-channel spiral twist extrusion (MCSTE) processing on
structural evolution, crystallographic texture and mechanical properties of AA1100,Materials Science and Engineering: A,737(2018)166-175,https://doi.org/10.1016/j.msea.2018.09.039

36. Ashraf Bakkar, Mohamed M.Z. Ahmed, Naser A. Alsaleh, Mohamed M. El-Sayed Seleman, Sabbah Ataya, Microstructure, wear, and corrosion characterization of high
TiC content Inconel 625 matrix composites, Journal of Materials Research and
Technology, Volume 8, Issue 1, January–March 2019, Pages 1102-1110,
https://doi.org/10.1016/j.jmrt.2018.09.001.

37. Mohamed M. El-Sayed Seleman, Mohamed M. Z. Ahmed, Sabbah Atayaa,
Microstructure and mechanical properties of hot extruded 6016 aluminum
alloy/graphite composites, Journal of Materials Science & Technology Volume 34,
Issue 9, September 2018, Pages 1580-1591,
https://doi.org/10.1016/j.jmst.2018.03.004

38. R. M. Khattab, M. M. El-Sayed Seleman, M. F. Zawrah, Assessment of electric arc
furnace dust: Powder characterization and its sinterability as ceramic product,
Ceramics International, Volume 43, Issue 15, 15 October 2017, Pages 12939-12947,
https://doi.org/10.1016/j.ceramint.2017.06.192

39. M. M. Z. Ahmed, Sabbah Ataya, M. M. El-Sayed Seleman, H.R. Ammar, Essam
Ahmed, Friction stir welding of similar and dissimilar AA7075 and AA5083,
Journal of Materials Processing Technology 242 (2017) 77-91,
https://doi.org/10.1016/j.jmatprotec.2016.11.024

40. W. Hoziefa, S. Toschi, M.M.Z. Ahmed, Al. Morri, A. A. Mahdy, M. M. El-Sayed
Seleman, I. El-Mahallawi, L. Ceschini, A. Atlama, Influence of friction stir
processing on the microstructure and mechanical properties of a compocast AA2024-
Al2O3 nanocomposite, Materials and Design 106 (2016) 273-284.
https://doi.org/10.1016/j.matdes.2016.05.114

41. M. M. Z. Ahmed, B. P. Wynne, M. M. El-Sayed Seleman, W. M. Rainforth, A
comparison of crystallographic texture and grain structure development in aluminum
generated by friction stir welding and high strain torsion, Materials and Design 103
(2016) 259-267, https://doi.org/10.1016/j.matdes.2016.04.056

42. M. M. Z. Ahmed, Essam Ahmed, A. S. Hamada, S. A. Khodir, M. M. El-Sayed
Seleman, B. P. Wynne, Microstructure and mechanical properties evolution of
friction stir spot welded high-Mn twinning-induced plasticity steel, Materials and
Design 91 (2016) 378-387, https://doi.org/10.1016/j.matdes.2015.12.001

43. Mohamed M. El-Sayed Seleman, Effects of Nickel Distribution on the
Strengthening and Toughening of Alumina Ceramics, Journal of Materials Science
& Technology., 24 [5] (2008) 723-728.

44. Mohamed M. El-Sayed Seleman, Processing Ceramic Based Nanocomposite using
α-Al2O3 Powder and FeCl2 Solution as Starting Materials, Journal of Materials
Science & Technology, 23 [6] (2007) 837-842.

45. M. M. El-Sayed Seleman, X. Sun and L. Zuo, “Thermal Shock Behaviour of
Alumina/Iron Composites” Journal of Materials Science & Technology, 18 [4]
(2002) 347-350.

46. M. M. El-Sayed Seleman, X. Sun and L. Zuo, “Effect of Iron Morphology and
Interfacial Bonding on the Toughening of Al2O3/Fe Composites” Journal of
Materials Science & Technology, 17, Suppl.1 (2001) S47-S51.

47. K. A. Khalil, B. Huang, Y. Li and M. M. El-Sayed Seleman, Comparison between
the Requirements of Flowability and Moldability and the Shape Retention of PIM
Compacts during Debinding Process, Journal of Materials Science & Technology,
17 [5] (2001) 490- 494.

48. M. M. El-Sayed Seleman, X. Sun, L. Zuo and K. A. Khalil, Properties of HotPressed Al2O3/Fe Composites, Journal of Materials Science & Technology, 17 [5]
(2001) 538-542.

BOOK CHAPTERS
1. Ebtessam Elfishawy, M. M. Z. Ahmed and Mohamed M. El-sayed Seleman
“Additive Manufacturing of Aluminum Using Friction Stir Deposition” (February
2020) TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings pp
227-238. https://link.springer.com/chapter/10.1007/978-3-030-36296-6_21

 INTERNATIONAL BOOKS
Participation with five topics out of a total of nine of the book's content of
1. "Advance in Friction Stir Processed Materials", Edited by Józef Iwaszko and
Jerzy Winczek , Printed Edition of the Special Issue Published in Materials,
Materials, MPDI, June 2022, ISBN 978-3-0365-4438-0 (Hbk); ISBN 978-3-0365-
4437-3 (PDF), https://doi.org/10.3390/books978-3-0365-4437-3
 

• 2021 Suez University Publication Award for high publication activity in scientific journals
• 2020 Suez University Publication Award for high publication activity in scientific journals
• 2019 Suez University Publication Award for high publication activity in scientific journals
• 2016-2018 Suez University Publication Award for high publication activity in scientific journals

PUBLICATIONS IN REFEREED INTERNATIONAL JOURNALS:

1-Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Essam Ahmed, Hagar AReyad,Naser A. Alsaleh, Ibrahim Albaijan,A Novel Friction Stir DepositionTechnique toRefill Keyhole ofFriction Stir Spot Welded AA6082-T6 DissimilarJoints ofDifferent Sheet Thicknesses,Materials2022,15, 6799.
https://doi.org/10.3390/ma15196799

2-.Ibrahim Albaijan, Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman,Kamel Touileb,Mohamed I. A. Habbaand Ramy A. Fouad,Optimization of BobbinTool Friction Stir ProcessingParameters of AA1050 Using Response Surface
Methodology,Materials2022, 15, 6886.https://doi.org/10.3390/ma15196886

3-.Sabbah Ataya, Mohamed M. El-Sayed Seleman, Fahamsyah H. Latief, Mohamed
M. Z. Ahmed, Khalil Hajlaoui, Yousef G. Y. Elshaghouland Mohamed I. A. Habba,Microstructure andMechanical Properties of AZ91 Rein-Forcedwith High Volume Fraction of Oriented Short Carbon Fibers,Materials2022, 15, 4818.
https://doi.org/10.3390/ma15144818

4- Sabbah Ataya, Mohamed M. El-Sayed Seleman, Fahamsyah H. Latief, Mohamed
M. Z. Ahmed, Khalil Hajlaoui, Ahmed M. Soliman, Naser A. Alsaleh and Mohamed
I. A. Habba, Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short
Carbon Fibers, Materials 2022, 15, 4841. https://doi.org/10.3390/ma15144841

5-. Hamouda M Mousa, Mahmoud Hamdy, Mohamed A Yassin, Mohamed M ElSayed Seleman, GT Abdel-Jaber, Characterization of nanofiber composite
membrane for high water flux and antibacterial properties, Colloids and Surfaces A:
Physicochemical and Engineering Aspects, Volume 651, 2022, 129655.
https://doi.org/10.1016/j.colsurfa.2022.129655

6-. Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman, Rana G. Eid, Ibrahim
Albaijan and Kamel Touileb, The Influence of Tool Pin Geometry and Speed on the
Mechanical Properties of the Bobbin Tool Friction Stir Processed AA1050, Materials
2022, 15, 4684. https://doi.org/10.3390/ma15134684

7-. Mohamed M.Z. Ahmed, Mohamed M. El-Sayed Seleman, Rana G. Eid, M.F.
Zawrah, Production of AA1050/silica fume composite by bobbin tool-friction stir
processing: Microstructure, composition and mechanical properties, CIRP Journal of
Manufacturing Science and Technology, 38 (2022) 801–812.
https://doi.org/10.1016/j.cirpj.2022.07.002

8-. Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Essam Ahmed, Hagar A
Reyad, Kamel Touileb, Ibrahim Albaijan, Friction Stir Spot Welding of Different
Thickness Sheets of Aluminum Alloy AA6082-T6. Materials 2022, 15, 2971.
https://doi.org/10.3390/ma15092971

9-. Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed MZ Ahmed, Ahmed
MM Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed
IA Habba, The Additive Manufacturing of Aluminum Matrix Nano Al2O3
Composites Produced via Friction Stir Deposition Using Different Initial Material
Conditions. Materials 2022, 15, 2926. https://doi.org/10.3390/ma15082926

10-. Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Kamel Touileb, Ibrahim
Albaijan, Mohamed IA Habba, Microstructure, Crystallographic Texture, and
Mechanical Properties of Friction Stir Welded Mild Steel for Shipbuilding
Applications. Materials 2022, 15, 2905. https://doi.org/10.3390/ma15082905

11-. Mohamed MZ Ahmed, Kamel Touileb, Mohamed M El-Sayed Seleman, Ibrahim
Albaijan, Mohamed IA Habba, Bobbin Tool Friction Stir Welding of Aluminum:
Parameters Optimization Using Taguchi Experimental Design. Materials 2022, 15,
2771. https://doi.org/10.3390/ma15082771

12. Mohamed M El-Sayed Seleman, Mohamed M Z Ahmed, Rashad M Ramadan,
Basant A Zaki, Effect of FSW Parameters on The Microstructure and Mechanical
Properties of T-joints between Dissimilar Al-Alloys. International Journal of
Integrated Engineering, Vol. 14 No. 1 (2022).
https://publisher.uthm.edu.my/ojs/index.php/ijie/article/view/6915

13. Sabbah Ataya, Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Khalil
Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef GY Elshaghoul,
Mohamed IA Habba, Effective Range of FSSW Parameters for High Load-Carrying
Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints. Materials 2022, 15,
1394. https://doi.org/10.3390/ma15041394

14. Ali S Hammad, Mohamed Zaky, Hong Lu, adel B elshabasy, Bandar Alzahrani,
Mohamed M El-Sayed Seleman, Yongquan Zhang, Abla El-Megharbel, Mechanical
properties of stationary shoulder friction stir welded Aluminum alloys AA7075-
T651, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of
Mechanical Engineering Science, January 2022.
https://doi.org/10.1177/09544062211070716

15. Mohamed M. El-Sayed Seleman, A.A.El-Kheshen, Mohamed F.Raslan,Rasha H.
Shoeir, Glass production using tailing of upgraded rare metal mineralization, Abu
Rusheid area-Egypt for nuclear waste immobilization, Ceramics International, 48, 1,
2022, 569-577, https://doi.org/10.1016/j.ceramint.2021.09.135.

16. Mohamed M. Z. Ahmed, Khalil Hajlaoui, Mohamed M. El-Sayed Seleman,
Mahmoud F. Elkady , Sabbah Ataya, Fahamsyah H. Latief and Mohamed I. A.
Habba, Microstructure and Mechanical Properties of Friction Stir Welded 2205
Duplex Stainless Steel Butt Joints, Materials 2021, 14(21), 6640;
https://doi.org/10.3390/ma14216640

17. Mohamed M. Z. Ahmed , Mahmoud A. Abdu Abdul-Maksoud, Mohamed M. ElSayed Seleman, Adel M. A. Mohamed, Effect of dwelling time and plunge depth on
the joint properties of the dissimilar friction stir spot welded aluminum and steel,
Journal of Engineering Research, Kuwait University, 2021 DOI:
https://doi.org/10.36909/jer.11367

18. Adel Mohamed, Hosam Hasan, Mohamed M El-Sayed Seleman, Essam Ahmed,
Sayed M Saleh, Rehab M El-Maghraby, Performance of Sprayed PVDF-Al2O3
Composite Coating for Industrial and Civil Applications, Materials 2021, 14(21),
6358; https://doi.org/10.3390/ma14216358

19. Bandar Alzahrani, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed,
Ebtessam Elfishawy, Adham MZ Ahmed, Kamel Touileb, Nabil Jouini, Mohamed IA
Habba, The Applicability of Die Cast A356 Alloy to Additive Friction Stir
Deposition at Various Feeding Speeds, Materials 2021, 14(20), 6018;
https://doi.org/10.3390/ma14206018

20. Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Ebtessam Elfishawy,
Bandar Alzahrani, Kamel Touileb, Mohamed IA Habba, The Effect of Temper
Condition and Feeding Speed on the Additive Manufacturing of AA2011 Parts Using
Friction Stir Deposition, Materials 2021, 14(21), 6396;
https://doi.org/10.3390/ma14216396

21. Mohamed M.El-Sayed Seleman, A.A.El-Kheshen, Mohamed F.Raslan,Rasha H.
Shoeir, Glass production using tailing of upgraded rare metal mineralization, Abu
Rusheid area – Egypt for nuclear waste immobilization, Ceramics International,
2021, https://doi.org/10.1016/j.ceramint.2021.09.135.

22. Dina M Fouad, Waleed H El-Garaihy, Mohamed MZ Ahmed, Ibrahim Albaijan,
Mohamed M. El-Sayed Seleman, Hanadi G Salem, Grain Structure Evolution and
Mechanical Properties of Multi-Channel Spiral Twist Extruded AA5083, Metals
2021, 11(8), 1276; https://doi.org/10.3390/met11081276

23. Mohamed MZ Ahmed, Mohamed IA Habba, Mohamed M El-Sayed Seleman,
Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily, Bobbin
Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process
Parameters on Temperature Distribution and Joints’ Properties, Materials 2021,
14(16), 4585; https://doi.org/10.3390/ma14164585

24. Mohamed M. Z. Ahmed, Khaled A. Abdelazem, Mohamed M. El-Sayed Seleman,
Bandar Alzahrani, Kamel Touileb, Nabil Jouini, Ismail G. El-Batanony, and Hussein
M. Abd El-Aziz, Friction Stir Welding of 2205 Duplex Stainless Steel: Feasibility of
Butt Joint Groove Filling in Comparison to Gas Tungsten Arc Welding, Materials
2021, 14 (16), 4597; https://doi.org/10.3390/ma14164597

25. Ahmed, M.M.Z.; Jouini, N.; Alzahrani, B.; Mohamed M. El-Sayed Seleman;
Jhaheen, M. Dissimilar Friction Stir Welding of AA2024 and AISI 1018:
Microstructure and Mechanical Properties, Metals 2021, 11(2), 330;
https://doi.org/10.3390/met11020330

26. Ahmed, M.M.Z.; Habba, M.I.A.; Jouini, N.; Alzahrani, B.; Mohamed M. El-Sayed
Seleman; El-Nikhaily, A. Bobbin Tool Friction Stir Welding of Aluminum Using
Different Tool Pin Geometries: Mathematical Models for the Heat Generation,
Metals 2021, 11(3), 438; https://doi.org/10.3390/met11030438

27. Ahmed, M.M.Z.; Ataya, S.; Mohamed M. El-Sayed Seleman; Mahdy, A.M.A.;
Alsaleh, N.A.; Ahmed, E. Heat Input and Mechanical Properties Investigation of
Friction Stir Welded AA5083/AA5754 and AA5083/AA7020, Metals 2021, 11(1),
68; https://doi.org/10.3390/met11010068

28. Ahmed, M.M.; Mohamed M. El-Sayed Seleman; Zidan, Z.A.; Ramadan, R.M.;
Ataya, S.; Alsaleh, N.A. Microstructure and Mechanical Properties of Dissimilar
Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints, Metals 2021, 11(1),
128; https://doi.org/10.3390/met11010128

29. Ahmed, M.M.Z.; Ataya, S.; Mohamed M. El-Sayed Seleman; Allam, T.; Alsaleh,
N.A.; Ahmed, E. Grain Structure, Crystallographic Texture, and Hardening Behavior
of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14, Metals 2021, 11(2),
181; https://doi.org/10.3390/met11020181

30. M.M.Z. Ahmed, Ahmed Elnaml, Mostafa Shazly and M. M. El-Sayed Seleman, the
effect of top surface lubrication on the friction stir welding of polycarbonate sheets,
International Polymer Processing, vol. 36, no. 1, 2021, pp. 94-102.,
https://doi.org/10.1515/ipp-2020-3991

31. Mohamed M. El-Sayed Seleman, Amany A. El-kheshen, Sherif Kharbish and
Wafaa R. Ebrahim, Utilization of cement kiln dust and some raw materials for
preparation of borosilic,ate glass, Interceram-International Ceramic Review,
69, pages 26–33 (2020), https://doi.org/10.1007/s42411-020-0426-8

32. M.M.Z. Ahmed, Mohamed M. El-Sayed Seleman, Mostafa Shazly, Moataz M.
Attallah, Essam Ahmed, Microstructural Development and Mechanical Properties of
Friction Stir Welded Ferritic Stainless Steel AISI 409, Journal of Materials
Engineering and Performance, 28, 6391–6406 (2019),
https://doi.org/10.1007/s11665-019-04365-9

33. Hoda Abd El-Azim, Mohamed M. El-Sayed Seleman, Eman M. Saad, Applicability
of Water-spray Electric Arc Furnace Steel Slag for Removal of Cd and Mn Ions From
Aqueous Solutions and Industrial Waste Waters, Journal of Environmental
Chemical Engineering, Volume 7, Issue 2, April 2019, 102915,
https://doi.org/10.1016/j.jece.2019.102915

34. Sabbah Ataya, Naser A. Alsaleh, M. M. El-Sayed Seleman, Strength and Wear
Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers, Acta Metall. Sin.
(Engl. Lett.) 32, 31-40 (2019), https://doi.org/10.1007/s40195-018-0771-z

35. D.M. Fouad, W.H. El-Garaihy, M.M.Z. Ahmed, M.M. El-Sayed Seleman, H.G.
Salem, Influence of multi-channel spiral twist extrusion (MCSTE) processing on
structural evolution, crystallographic texture and mechanical properties of AA1100,Materials Science and Engineering: A,737(2018)166-175,https://doi.org/10.1016/j.msea.2018.09.039

36. Ashraf Bakkar, Mohamed M.Z. Ahmed, Naser A. Alsaleh, Mohamed M. El-Sayed Seleman, Sabbah Ataya, Microstructure, wear, and corrosion characterization of high
TiC content Inconel 625 matrix composites, Journal of Materials Research and
Technology, Volume 8, Issue 1, January–March 2019, Pages 1102-1110,
https://doi.org/10.1016/j.jmrt.2018.09.001.

37. Mohamed M. El-Sayed Seleman, Mohamed M. Z. Ahmed, Sabbah Atayaa,
Microstructure and mechanical properties of hot extruded 6016 aluminum
alloy/graphite composites, Journal of Materials Science & Technology Volume 34,
Issue 9, September 2018, Pages 1580-1591,
https://doi.org/10.1016/j.jmst.2018.03.004

38. R. M. Khattab, M. M. El-Sayed Seleman, M. F. Zawrah, Assessment of electric arc
furnace dust: Powder characterization and its sinterability as ceramic product,
Ceramics International, Volume 43, Issue 15, 15 October 2017, Pages 12939-12947,
https://doi.org/10.1016/j.ceramint.2017.06.192

39. M. M. Z. Ahmed, Sabbah Ataya, M. M. El-Sayed Seleman, H.R. Ammar, Essam
Ahmed, Friction stir welding of similar and dissimilar AA7075 and AA5083,
Journal of Materials Processing Technology 242 (2017) 77-91,
https://doi.org/10.1016/j.jmatprotec.2016.11.024

40. W. Hoziefa, S. Toschi, M.M.Z. Ahmed, Al. Morri, A. A. Mahdy, M. M. El-Sayed
Seleman, I. El-Mahallawi, L. Ceschini, A. Atlama, Influence of friction stir
processing on the microstructure and mechanical properties of a compocast AA2024-
Al2O3 nanocomposite, Materials and Design 106 (2016) 273-284.
https://doi.org/10.1016/j.matdes.2016.05.114

41. M. M. Z. Ahmed, B. P. Wynne, M. M. El-Sayed Seleman, W. M. Rainforth, A
comparison of crystallographic texture and grain structure development in aluminum
generated by friction stir welding and high strain torsion, Materials and Design 103
(2016) 259-267, https://doi.org/10.1016/j.matdes.2016.04.056

42. M. M. Z. Ahmed, Essam Ahmed, A. S. Hamada, S. A. Khodir, M. M. El-Sayed
Seleman, B. P. Wynne, Microstructure and mechanical properties evolution of
friction stir spot welded high-Mn twinning-induced plasticity steel, Materials and
Design 91 (2016) 378-387, https://doi.org/10.1016/j.matdes.2015.12.001

43. Mohamed M. El-Sayed Seleman, Effects of Nickel Distribution on the
Strengthening and Toughening of Alumina Ceramics, Journal of Materials Science
& Technology., 24 [5] (2008) 723-728.

44. Mohamed M. El-Sayed Seleman, Processing Ceramic Based Nanocomposite using
α-Al2O3 Powder and FeCl2 Solution as Starting Materials, Journal of Materials
Science & Technology, 23 [6] (2007) 837-842.

45. M. M. El-Sayed Seleman, X. Sun and L. Zuo, “Thermal Shock Behaviour of
Alumina/Iron Composites” Journal of Materials Science & Technology, 18 [4]
(2002) 347-350.

46. M. M. El-Sayed Seleman, X. Sun and L. Zuo, “Effect of Iron Morphology and
Interfacial Bonding on the Toughening of Al2O3/Fe Composites” Journal of
Materials Science & Technology, 17, Suppl.1 (2001) S47-S51.

47. K. A. Khalil, B. Huang, Y. Li and M. M. El-Sayed Seleman, Comparison between
the Requirements of Flowability and Moldability and the Shape Retention of PIM
Compacts during Debinding Process, Journal of Materials Science & Technology,
17 [5] (2001) 490- 494.

48. M. M. El-Sayed Seleman, X. Sun, L. Zuo and K. A. Khalil, Properties of HotPressed Al2O3/Fe Composites, Journal of Materials Science & Technology, 17 [5]
(2001) 538-542.

PUBLICATIONS IN REFEREED NATIONAL JOURNALS
1. M.I.A. Habbaa, M. M. Z. Ahmed, Mohamed M. El-Sayed Seleman, A. EL-Nikhaily,
An Analytical Model of Heat Generation for Friction Stir Welding Using Bobbin Tool
Design, Journal of Petroleum and Mining Engineering 20 (1) 2018, 1-5.

2. Osama M. Awad; Mohamed M. El-Sayed Seleman; M. M. Z. Ahmed; H. R. Ammar
Production and Characterization of AA7075-Graphite Composite Using Friction Stir
Processing, Journal of Petroleum and Mining Engineering 20 (1) 2018, 101-110.

3. Eyd M. ELSayed, M. M. Z. Ahmed, Mohamed M. ELSayed. Seleman, A. ELNikhaily, Effect of Number of Friction Stir Processing Passes on Mechanical Properties
of SiO2/5083Al Metal Matrix Nano-Composite, Journal of Petroleum and Mining
Engineering 19 (1) 2017, 10-17

4. Mohamed M. El-Sayed Seleman, Neven Ali, Magdy S. Basta, Farouk A. Mohamed,
Assessment of Using Assessment of Using A New Egyptian Fluxing Material for
Ceramic Tiles Production, Journal of Petroleum and Mining Engineering (JPME), Suez
canal University, 14 [2], 67-89 (2011).

5. K. A. Khalil, Mohamed M. El-Sayed Seleman, G. T. Abdelgaber and M. K. Hassan,
Mechanical Properties and Wear Resistance of 17-4 Stainless Steel Compacts used for
Dental Brackets, Journal of Engineering Sciences (JES), of the Assiut University,
Vol.33, No.4, Part: B, July, 1431-1441(2005).
 

Undergraduate Courses:

Materials Processing and Characterization
Material Science and Engineering
Materials Selection for Design
Manufacturing Processes
Ceramic Engineering
Composite materials
Powder Metallurgy
Welding Metallurgy
Heat treatment Technology
Destructive Material Testing
Non-destructive Material Testing
Failure Analysis
Casting
Industrial Safety
Corrosion
Polymers Engineering
Electrochemistry of Metals
History of Engineering
Economies and industrial organization
Scientific Thinking
New Materials

*Graduation Project : Other General Scientific & Engineering Courses Can be Taught

Graduate Courses:

INTERNATIONAL WORKSHOPS (ORGANIZATION AND PRESENTATIONS)

• Organized and chaired a session in the 1st Jordanian-Egyptian workshop on "Technical and Research Collaboration in Nanotechnology, Applications and Recent developments" December 21-23, 2014, Amman, Jordan.
• A member of the organization committee of the US-Egypt workshop on Synthesis, Characterization and Industrial Applications of Nanoparticles and Nanostructure Materials, November 11-15, 2005, Mubarak City for Scientific Research &Technology Applications (MuCSAT), Alexandria, Egypt.
• Organized and chaired a session in the 2nd Egyptian-Belarusian Workshop on New and Renewable Resources, September 26-29, 2005, Academy of Scientific Research and Technology (ASRT), Cairo, Egypt.
• Organized and chaired a session in the 3th US - Africa Workshop on Advanced Materials, December 11-15, 2004, ASRT, Cairo, Egypt.
• Organized and chaired a session in the 5th Egyptian-Ukranian Workshop on Nanomaterials and Nanotechnology form 29-11-2004 to 2-12-2004, Academy of Scientific Research and Technology (ASRT), Cairo, Egypt.
•  Chaired a session in the Belarus National Academy of Sciences - Egypt Academy of Scientific Research and Technology Workshop on Current Activities of Nanomaterials from 9 -17 August, 2004, Minsk, Belarus.

PUBLICATIONS IN REFEREED CONFERENCES
1. Tarek Ali Elmelegy, N. S. M. El-Tayeb, Mostafa Shazly, Mohamed M. El-Sayed
Seleman, M. M. Z. Ahmed, Investigation of Erosion Behaviour of Coated GFRP
Composites for Wind Turbine Applications, the 4th international congress on technology
engineering & science, Kuala Lumpur, Malaysia (2017) 351-360.

2. Sabbah Ataya, Mohamed M. EL-Sayed Seleman, Microstructure Stability of CuZn37
Brass, the 14th International Materials Symposium (IMSP’2012) 10-12 October,
Pamukkale University, Denizli, Turkey (2012)

3. M. M. El-Sayed Seleman, X. Sun and L. Zuo, Synthesis and Sintering behavior of a
Nanocrystalline -Alumina Powder, in Proc. Of the 5th Ukrainian-Egyptian Conference
on Nanomaterials and Nanotechnology, ASRT, Cairo, Egypt, November (2004)

4. Mohamed M. El-Sayed Seleman, Microstructure and Mechanical Properties of the
Hot-Pressed Al2O3/Ni Composites, in Proc. Of the 5th Egyptian-Syrian Conference in
Chemical and Petroleum Engineering, Suez, Egypt, Vol. III, Materials Eng.&
Environment, 13-16 October, 849-865(2003).

5. M. M. El-Sayed Seleman, F. Zhang, X. Sun and L. Zuo, Microstructure and Fracture
Toughness of Iron Particle Toughened Alumina Matrix Composites, in Proc. of the
ICCE/7, ed. D. Hui, Denver-Colorado, USA, 783-784 (2000).

6. M. M. El-Sayed Seleman, R. M. Ramadan, G. M. Attia, and S. Ibrahim, Production of
Copper-Tin-Graphite composite Materials, the 5th Int. Conf. of Petr., Min.& Metall.
Eng., 22-24 Feb., Suez, Egypt (1997).
 

INTERNATIONAL TRAINING COURSES IN MATERIALS CHARACTERIZATION

1. Training Course at JINAN Precision Testing Equipment Co., LTD, JINAN, CHINA, 13th to 18th March, 2019
Training On model WDW-300D Computer Control Electromechanical universal Testing Machine and the Friction Testing Machine
2. Extensive Training Course, BRUKER, Karlsruhe, Germany, 9-12 October 2018 for
Optical Emission Spectrometer Q2 ION with the following subjects

• Operation and handling of the instrument
• Software Training
• Training of daily routines and maintenance

2. Extensive Two Advanced Training Courses in "Applications of Scanning Electron
Microscopy (SEM) in materials characterization, Tilburg, Netherlands 9-13
November 2015:

•  EDAX EBSD Training Course, AMETEK MATERIALS ANALYSIS DIVISION, Tilburg, Netherlands, 9-11 November 2015.
• EDAX TEAM EDS Short Training Course, AMETEK MATERIALS ANALYSIS DIVISION, Tilburg, Netherlands, 12-13 November 2015

SPECIAL TRAINING COURSES FOR TECHNICIANS AND ENGINEERS IN THE FOLLOWING COMPANIES IN EGYPT :
 Petrojet Company
 Suze Oil Processing Company (SOPC)
 Khalda Petroleum Company
 Bader Petroleum Company (BAPETCO)
 El-Naser Company for Fertilizer and Chemical Industries
 Suez Cement Company
 

Professor Dr. Mohamed El-Nagar
(Published Name: Mohamed M. El-Sayed Seleman)
Department of Metallurgical and Materials Engineering
Faculty of Petroleum and Mining Engineering,Suez University
Mobile: (+2) 01000926131 
E-mails: mohamed.elnagar@suezuniv.edu.eg
mmelnagar@yahoo.com

Web of Science: https://www.webofscience.com/wos/author/record/AAE-7946-2022
Scopus profile: https://www.scopus.com/authid/detail.uri?authorId=6504418291
Scopus Author ID: 6504418291
ORCID Connecting research and researchers: https://orcid.org/0000-0002-6836-3874
Google scholar: https://scholar.google.com/citations?user=oryZDjkAAAAJ&hl=en
Research gate:
https://www.researchgate.net/profile/Mohamed-El-Sayed-Seleman/research
1. PERSONAL INFORMATION