Université de Suez
login
French français
faculty name

Faculté d'Ingénierie du Pétrole et de la Mine

Sabbah Mohamed Selim ATAYA

Egyptian

English and German

Faculty of petroleum and Mining Engineering

Department of Metallurgical and Materials Engineering

s.ataya@pme.suezuni.edu.sa

 

Currently (in Leave)

College of Engineering,

Department of Mechanical Engineering,

Al Imam Muhamed Ibn Saud Islamic University, Riyadh, KSA

Tel.:+966 1125 87697

 

Scopus ID:  56030898500

Scopus Web Page: https://www.scopus.com/authid/detail.uri?authorId=56030898500

Web of science ID: GXH-4615-2022

Web of science ID:  https://www.webofscience.com/wos/author/record/H-4336-2012

Google scholar:  https://scholar.google.com/citations?user=I_nXDRkAAAAJ&hl=en&oi=ao

Conference papers (12)

  1. Ahmed Elkawas, Sabbah Ataya, Samir Ibrahim, Effect of Rolling Conditions on Ferrite Refinement of Low-carbon Steel, The International Conference on Engineering and Technology, Materials Track, 10-11 Oct. 2012, GUC, Cairo, DOI:10.1109/ICEngTechnol.2012.6396159
  2. S. Ataya, and S. Ibrahim, On the Lüder's Strain of Static Strain Aged Dual Phase Steel, The International Conference on Engineering and Technology, Materials Track, 10-11 Oct. 2012, GUC, Cairo, DOI: 10.1109/ICEngTechnol.2012.6396125
  3. Sabbah Ataya, Mohamed M. EL-Sayed Seleman, Microstructure Stability of CuZn37 Brass, 14th International Materials Symposium (IMSP’2012) 10-12 October 2012, Pamukkale University – Denizli - Turkey.
  4. S. Ataya, MMZ Ahmed, Mechanical Evaluation of 20 Years Old Wind Turbine Blades Composites” 14th International Materials Symposium (IMSP’2012) 10-12 October 2012, Pamukkale University – Denizli - Turkey.
  5. Sabbah Ataya and Mohamed M.Z. Ahmed: Forms of discontinuities in 100 KW and 300 KW Wind Turbine, 10th World Wind Energy Conf. (WWEC10), Cairo, 31 Oct. - 2 Nov. 2011.
  6. S. Ataya, T. Sadowski: FE-simulation of thermal shock in layered ceramic composites, 11th Int. Conf. Mining, Petroleum and Metallurgical Eng. (MPM11), 15-19 March 2009, Sharm El-Shiekh.
  7. S. Ataya, E. El-Magd: “Modeling and FE Simulation the creep behavior of Mg alloys with and without short-fiber reinforcement”, International Conf. on Mesomechanics, Cairo, January 28-31 (2008).
  8. S. Ataya, E. El-Magd: Experimental Investigation and Modeling the Quasi-Static Behaviour of Mg-Alloys with and without Short Fiber Reinforcement, proceeding of the first afro asian conf. on adv. mater. sci. & tech., Cairo (2006) 17-29
  9. S. Ataya, E. El-Magd: “Experimental investigation and FE-simulation of the mechanical behavior of AE42 and AZ91 reinforced by carbon short fibres in: “Materials for Safety and Health”, ed. G. S. Sih and T. Vu-Kahn, Proceedings of the 7th International Conference on Mesomechanics, Montreal (2005) 147-155.
  10. S. Ataya, E. El-Magd: “Ermüdungsverhalten von kurzfasernverstärkten Mg-Legierungen“, in: „Herausforderung neuer Werkstoffe an die Forschung und Werkstoffprüfung“, Ed. W. Grellmann, DVM 2005, ISSN 1861-8154, 2005, Tagungsband Werkstoffprüfung (2005) 227-232
  11. E. El-Magd, M. Korthäuer, S. Ataya: “Experimental and numerical investigations of the specimen size effects on the flow behaviour of W/Cu composites” in "Multiscaling in applied science and emerging technology", Ed. G. C. Sih, Th. B. Kermanidis and Sp. G. Pantelakis, Proceedings of the 6th international conference for Mesomechanics, Patras (2004) 149-154.
  12. S. Ataya, S. Mielke, E. El-Magd: Creep behavior of Mg-Alloys AE42 and AZ91 reinforced with carbon short fibers in “Magnesium Alloys and their Applications” Ed. K.U. Kainer, Wiley-VCH Verlag, Weinheim (2003) 384-389.

 

(7) Book and Book chapters

  1. Sabbah Ataya, Load Carrying Capacity and Microstructure of Resisitance Spot Welded Dual-Phase (DP600) Steel, Characterization of Minerals, Metals, and Materials, Edit. John S. Carpenter et. al, TMS, The Minerals, Metals and Materials Society (2014) 297-304.
  2. S. Ataya and T. Emde, Friction Coefficients on Compression Testing of AA6060 and 42CrMo4 with Different Lubrication Conditions, in light metals, Edited by John Grandfield, TMS, The Minerals, Metals and Materials Society,(2014) 377-382.
  3. E. El-Magd, M. Korthäuer, S. Ataya, S. G. Schulz (2009) "Experimentelle und numerische Untersuchung der Größeneinflüsse auf das Fließverhalten von W/Cu-Teilchenverbundwerkstoffen und Stählen" in Grösseneinflüesse bei Fertigungsprozessen, F. Vollertsen, BIAS Bremen ISBN: 978-3-933762-0, 241-266
  4. S. Ataya: „Mechanisches Verhalten kurzfaserverstärkter Mg-Legierungen“, Dr.-Ing. Dissertation, Mainz-Verlag, Aachen, 2006, ISBN: 3-86130-823-1.
  5. M. Korthäuer, S. Ataya, E. El-Magd: Experimentelle und numerische Untersuchungen von Größeneinflüssen von W/Cu-Teilchenverbundwerkstoffen in Strahltechnik, ed. F. Vollertsen, BIAS Verlag, Bremen, Vol. 27 (2005) 167-178
  6. M. Korthäuer, S. Ataya, E. El-Magd: Scaling effects on the deformation behaviour of W/Cu sintered composite materials, BIAS Verlag, Bremen, Vol. 24 (2003) 57-64
  7. M. Korthäuer, S. Ataya, E. El-Magd: Bestimmung des Fließverhaltens durch Stauch- und Scherversuche an W-Cu Teilchenverbundwerkstoffen unter Berücksichtigung von Größeneinflüssen in „Herausforderung durch den industriellen Fortschritt“, Ed. O. W. Buchholz und S. Geisler, Verlag Stahleisen (2003) 151-157.

2013 - 2014   Head of Department of Metallurgy and Materials Engineering

University degrees:

Dec. 2005

 

Dr. Eng.      Aachen University, Faculty of Mechanical Engineering.

Thesis:      Mechanical behaviour of short fibers reinforced Mg-Alloys

Dec. 1995

Master:      Mechanical Metallurgy, Suez Canal University, Suez.

Mai 1990

Bachelor:  Metallurgical Eng., Suez Canal University, Suez.

Professions:

Since Dec. 2017

Professor:      Materials Engineering & Manufacturing, Al Imam Mohammad Ibn Saud Islamic University (IMSIU)

2014-2017

Associate Prof. at Department of Mechanical Engineering, Al Imam Mohammad Ibn Saud Islamic University (IMSIU)

2013 - 2014

Head of Department of Metallurgy and Materials Engineering

Jan 2013

Associate Prof.: Department of Metallurgy & Materials Engineering, Faculty of Petroleum & Mining Eng., Suez University

2007 -2012

Assistant Prof.: Faculty of Petroleum & Mining Eng., Suez University

01.2006–10-2007

Post-doctoral: Departement of materials science „Lehr- und Forschungsgebiet Werkstoffkunde, LFW“

                         RWTH - Aachen University, Germany.

01.00 – 12.05

Ph.D. Student:  at LFW, RWTH (Aachen University)

02.93 – 06.99

 

Assistant:       Department of Metallurgy, Faculty of Petroleum & Mining  Eng., Suez, Egypt.

02.92 – 01.93

 

Assistant:       Central Metallurgical Research and Development Institute (CMRDI), Welding Dept., Eltibbin, Cairo.

English and German

Germany (July 1999 – Sept. 2007)

Canada, South Korea, Switzerland, Portugal, Poland, France, Belgian, Nederland, Luxemburg, Denmark, KSA

00201271722062

sabbahataya@gmail.com

Web of science ID: GXH-4615-2022

Web of science ID:  https://www.webofscience.com/wos/author/record/H-4336-2012

Google scholar:  https://scholar.google.com/citations?user=I_nXDRkAAAAJ&hl=en&oi=ao

Scopus ID:  56030898500

Scopus Web Page: https://www.scopus.com/authid/detail.uri?authorId=56030898500

  • Scientific supervision of many graduation projects (Studiumarbeit) and Master thesis (Diplomarbeit) in Germany, Egypt and in Al Imam Mohammad Ibn Saud Islamic University (IMSIU), KSA.

Scholarships & Fellowship

  1. Post-doctor fellowship, at Faculty of Mechanical Engineering, Department of Materials Science (LFW), RWTH-Aachen, Germany, Jun.- Aug. 2009
  2. Post-doctor fellowship, at LFW, RWTH-Aachen, 2006-2007
  3. Scholarship (researcher) at LFW, RWTH-Aachen, 2004-2005
  4. Governmental scholarship for Ph.D., at (LFW), RWTH-Aachen, 2000-2004

  • Engineering inspection and failure analysis.
  • Alloys and microstructure development.
  • Steel processing and roll pass design.
  • Manufacturing and materials processing
  • New- and Biomaterials
  • Finite element simulation
  • Composite and advanced materials.
  • Creep, wear and fatigue (LCF & HCF) of materials.
  • Wind turbine blade inspection and repair.

Referee & Review Activities:

  • Reviewer for many international journal.
  • Referee and evaluation of research proposals for many universities.
  • Referee the research & scientific production of many candidates for promotion in many universities.
  • Technical committee member of the International Engineering Conference and Exhibition IECE 2020, Riyadh

Grants & Projects

A- In KSA

  1. Co-PI, Research group “Advanced machining processes of materials: Process evaluation and product characterization” Imam Univ., July 2023-2024 120 kSR - running
  2. Co-PI, Research project “Microstructure Evolution and Mechanical Properties of Advanced Metallic Alloys Processed by Thermo-mechanical” Imam Univ., 2022-2023 150 kSR - running
  3. Co-PI International Research Partnership “Stimulating synergy in novel manufacturing processes to produce ultrafine and nanocrystalline grained metals” Imam Univ., 2022-2023, 200 kSR – Completed
  4. PI International Research Partnership “Developing the underlying titanium metallurgy for digital twin exploitation” Imam Univ., July 2022-2023, 200 kSR - Completed
  5. Co-PI, Research group “Processing and Characterization of Advanced Composite Materials” Imam Univ., July 2021 150 kSR - Completed
  6. PI “Improvement of pass design for rebar steel produced by slit rolling technology based on finite element simulation method using industrial data” Imam Univ., Nov. 2020, 170 kSR.

 

B- In Egypt

  1. Co-PI of the project "Industrial scale production of ultra-fine grained high toughness and ductility steel" STDF 11842, Egypt, Oct. 2015 – Nov. 2016, 0.7 M LE.
  2. Co-PI of the project “Production of High-Mn stainless steels with extremely attractive combinations of ultrahigh strength and ductility " STDF 10751, Egypt, Oct. 2015 – Nov. 2016, 0.8 M LE.
  3. Co-PI of the Center of Scientific Excellence of Suez and Sinai Metallurgical and Materials Research, STDF-5304, Jul. 2013 –Aug 2016, 10 M L.E.
  4. Co-PI of the STDF financed project: Friction Stir Welding of Similar and Dissimilar Metal Alloys: Adopting the New Joining Technology for Industrial Applications in Egypt, May 2012 – Jun 2015, 1 M L.E.
  5. Principal investigator of the project: “Crack Mitigation in Wind Turbine Blades: Experimental and numerical investigation” STDF-1795, Jan 2011 – Oct. 2013, 1 M L.E.
  6. PI of a project no. BMBF EGY09-02 financed by Germany (BMBF) for 6 months between Egypt and Germany under the title: Validation of quasi-static and creep test results from a materials testing lab in Suez, 2009

 

C. In Germany (participation in the following research projects)

  1. Characterization & Modeling of short fibers reinforced Mg-alloys: plastic behavior, creep, Fatigue (industry contract) 2004.
  2. Experimental & numerical investigation of the size effects on the flow behavior of W/Cu composites and steels (SSP 1138, DFG) 2004-2009.
  3. FVV-822, Germany 2006-2009,Contact pressure dependant heat transfere in motor environment (AiF, Arbeitsgemeinschaft industrieller Forschungsvereinigungen)

Books and Book chapters

  1. Sabbah Ataya, Load Carrying Capacity and Microstructure of Resisitance Spot Welded Dual-Phase (DP600) Steel, Characterization of Minerals, Metals, and Materials, Edit. John S. Carpenter et. al, TMS, The Minerals, Metals and Materials Society (2014) 297-304.
  2. S. Ataya and T. Emde, Friction Coefficients on Compression Testing of AA6060 and 42CrMo4 with Different Lubrication Conditions, in light metals, Edited by John Grandfield, TMS, The Minerals, Metals and Materials Society,(2014) 377-382.
  3. E. El-Magd, M. Korthäuer, S. Ataya, S. G. Schulz (2009) "Experimentelle und numerische Untersuchung der Größeneinflüsse auf das Fließverhalten von W/Cu-Teilchenverbundwerkstoffen und Stählen" in Grösseneinflüesse bei Fertigungsprozessen, F. Vollertsen, BIAS Bremen ISBN: 978-3-933762-0, 241-266
  4. S. Ataya: „Mechanisches Verhalten kurzfaserverstärkter Mg-Legierungen“, Dr.-Ing. Dissertation, Mainz-Verlag, Aachen, 2006, ISBN: 3-86130-823-1.
  5. M. Korthäuer, S. Ataya, E. El-Magd: Experimentelle und numerische Untersuchungen von Größeneinflüssen von W/Cu-Teilchenverbundwerkstoffen in Strahltechnik, ed. F. Vollertsen, BIAS Verlag, Bremen, Vol. 27 (2005) 167-178
  6. M. Korthäuer, S. Ataya, E. El-Magd: Scaling effects on the deformation behaviour of W/Cu sintered composite materials, BIAS Verlag, Bremen, Vol. 24 (2003) 57-64
  7. M. Korthäuer, S. Ataya, E. El-Magd: Bestimmung des Fließverhaltens durch Stauch- und Scherversuche an W-Cu Teilchenverbundwerkstoffen unter Berücksichtigung von Größeneinflüssen in „Herausforderung durch den industriellen Fortschritt“, Ed. O. W. Buchholz und S. Geisler, Verlag Stahleisen (2003) 151-157.

University degrees:

Dec. 2005

 

Dr. Eng.      Aachen University, Faculty of Mechanical Engineering.

Thesis:      Mechanical behaviour of short fibers reinforced Mg-Alloys

Dec. 1995

Master:      Mechanical Metallurgy, Suez Canal University, Suez.

Mai 1990

Bachelor:  Metallurgical Eng., Suez Canal University, Suez.

Publications

 

  • 71 Publications (54 Journal paper, 12 Conference papers, 7 Book & Book chapters)

Total Journal papers (54)

#

Publications

Impact factor

54

Ibrahim Sari, Mahmoud Ahmadein, Sabbah Ataya, Lakhdar Hachani, Kader Zaidat, Nashmi Alrasheedi, Menghuai Wu and Abdellah Kharicha, Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate, Materials 2023, 16(21),

3.4

Q2

53

Xu Song, Naser Alsaleh, D. Thresh kumar, Murugesan Palaniappan, Abdullah Abdullatif Aly Elfar, Sabbah Ataya, Enabling customer participation for the implementation of sustainable manufacturing, Journal of Cleaner Production, 2024, 140803, https://doi.org/10.1016/j.jclepro.2024.140803.

 

11.1, Q1

52

Mohamed M. El-Sayed Seleman, Sabbah Ataya, Hayam A. Aly, Barun, Haldar, Naser A. Alsaleh, Mohamed M. Z. Ahmed, Ashraf Bakkar, Khaled M.Ibrahim Effect of Si Content on the Dry and Wet Sliding Wear Behavior of the Developed Ti-15Mo-(0-2) Si Alloys for Biomedical Applications, Metal 2023, 13(11), 1861; https://doi.org/10.3390/met13111861

2.9

Q2

51

Nashmi H Alrasheedi, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Sabbah Ataya, Fatigue and Fracture Behaviors of Short Carbon Fiber Reinforced Squeeze Cast AZ91 at 20° C and 250° C, Crystals 2023, 13(10), 1469; https://doi.org/10.3390/cryst13101469

2.7

Q2

50

Naser A Alsaleh, Akrum Abdul-Latif, Fahamsyah H Latief, Mohamed MZ Ahmed, Sabbah Ataya, Plastic Behavior of Metals and Their Sensitivity to Grain Size: Comparison between Two Multiscale Approaches, Crystals 2023, 13(10), 1463; https://doi.org/10.3390/cryst13101463

2.7

Q2

49

Mahmoud Ahmadein, Naser A Alsaleh, Mahmoud Ahmed Elsayed, Sabbah Ataya, Analysis of the Effect of Simultaneous Melt Shearing and Cooling on Grain Formation and Rheology of A356 Aluminum Alloy, Crystals 2023, 13(9), 1345; https://doi.org/10.3390/cryst13091345

2.7

Q2

48

H  illol  . Joardar,   Nitai .Sundaor S.  Das, Barun . Haldar, Kalipada. P. Maity, Naser Abdulrahman Alsaleh and Sabbah Ataya, An Upper Bound Energy Formulation of Free-Chip Machining with Flat Chips and an Alternative Method of Determination of Cutting Forces without Using the Merchant’s Circle Diagram, Machines 2023, 11(9), 853; https://doi.org/10.3390/machines11090853

2.899

Q2

47

Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Sabbah Ataya, Mohamed MZ Ahmed, Khamis Essa, Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion, Micromachines 2023, 14(8), 1642; https://doi.org/10.3390/mi14081642

3.4

Q2

46

Solomon Bayu Huluka, Rachid Baleh, Naser A Alsaleh, Adel Alfozan, Akrum Abdul-Latif, Sabbah Ataya, Effect of a Multiaxial Load of Reverse Torsion on Open-Cell Aluminum Foams Behavior, Materials 2023, 16(14), 5136; https://doi.org/10.3390/ma16145136

3.4

Q2

45

Mohamed IA Habba, Naser A Alsaleh, Takwa E Badran, Mohamed M El-Sayed Seleman, Sabbah Ataya, Ahmed E El-Nikhaily, Akrum Abdul-Latif, Mohamed MZ Ahmed, Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect, Materials 2023, 16(14), 5124; https://doi.org/10.3390/ma16145124

3.4

Q2

44

Naser A Alsaleh, Mohamed M El-Sayed Seleman, Ahmed MM Hassan, Mohamed MZ Ahmed, Sabbah Ataya, Fahamsyah H Latief, Akrum Abdul-Latif, Mohamed IA Habba, Additively Manufactured Parts from AA2011-T6 Large-Diameter Feedstocks Using Friction Stir Deposition, Materials 2023, 16(14), 4904; https://doi.org/10.3390/ma16144904

3.4

Q2

43

Nashmi H Alrasheedi, Sabbah Ataya, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Tensile Deformation and Fracture of Unreinforced AZ91 and Reinforced AZ91-C at Temperatures up to 300 °C, Materials 2023, 16(13), 4785; https://doi.org/10.3390/ma16134785

3.4

Q2

42

Alessandro Abena, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Hybrid Finite Element–Smoothed Particle Hydrodynamics Modelling for Optimizing Cutting Parameters in CFRP Composites, Polymers 2023, 15(13), 2789; https://doi.org/10.3390/polym15132789

4.967

Q1

41

Ho Lam Au-Yeung, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A. Alsaleh, Mohamed M. Z. Ahmed, and Khamis Essa, Non-Destructive Disassembly of Interference Fit under Wear Conditions for Sustainable Remanufacturing, Machines 2023, 11 (5), 538; https://doi.org/10.3390/machines11050538

2.899

Q2

40

  Naser A Alsaleh, Sabbah Ataya, Fahamsyah H Latief, Mohamed MZ Ahmed, Ahmed Ataya, Akrum Abdul-Latif, LCF and HCF of Short Carbon Fibers Reinforced AE42 Mg Alloy, Materials 2023, 16(10), 3686; https://doi.org/10.3390/ma16103686

3.748

Q1

39

Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites, Polymers 2023, 15(8), 1897; https://doi.org/10.3390/polym15081897

4.967

Q1

38

Rashid Khan, Sabbah Ataya, Islam Elgammal, Khamis Essa, Reduced Slit Rolling Power in Rebar Steel Production, Materials 2023, 16(5), 2104; https://doi.org/10.3390/ma16052104

3.748

Q1

37

Mohamed MZ Ahmed, Ahmed RS Essa, Sabbah Ataya, Mohamed M El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Joffin J Ponnore, Abdelkarim YA Mohamed, Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties, Materials 2023, 16(5), 2031; https://doi.org/10.3390/ma16052031

3.748

Q1

36

Mohamed Abd Elaziz, Mahmoud Ahmadein, Sabbah Ataya, Naser Alsaleh, Agostino Forestiero, Ammar H Elsheikh: A Quantum-Based Chameleon Swarm for Feature Selection, Mathematics (2022), 10(19), 3606; https://doi.org/10.3390/math10193606

2.59

35

Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Ahmed M Soliman, Naser A Alsaleh, Mohamed IA Habba:

Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short Carbon Fibers, Materials (2022),15(14), 4841; https://doi.org/10.3390/ma15144841

3.748

Q1

34

Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Yousef GY Elshaghoul, Mohamed IA Habba: Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers,

Materials (2022), 15(14), 4818;https://doi.org/10.3390/ma15144818

3.748

Q1

33

Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed MZ Ahmed, Ahmed MM Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed IA Habba:

The Additive Manufacturing of Aluminum Matrix Nano Al2O3 Composites Produced via Friction Stir Deposition Using Different Initial Material Conditions, Materials (2022), 15(8), 2926; https://doi.org/10.3390/ma15082926

3.748

Q1

32

Sabbah Ataya, Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef GY Elshaghoul, Mohamed IA Habba:

Effective Range of FSSW Parameters for High Load-Carrying Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints, Materials (2022), 15(4), 1394; https://doi.org/10.3390/ma15041394

3.748

Q1

31

Mohamed I. A. Habba Mohamed M. Z. Ahmed,Khalil Hajlaoui, Mohamed M. El-Sayed Seleman, Mahmoud F. Elkady, Sabbah Ataya,Fahamsyah H. Latief, Mohamed I. A. Habba, Microstructure and Mechanical Properties of Friction Stir Welded 2205 Duplex Stainless Steel Butt Joints,

Materials (2021), 14(21), 6640; https://doi.org/10.3390/ma14216640

3.748

Q1

30

Mohamed MZ Ahmed, Mohamed IA Habba, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily, Bobbin Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process Parameters on Temperature Distribution and Joints’ Properties,

Materials (2021), 14(16), 4585; https://doi.org/10.3390/ma14164585

3.748

Q1

29

MMZ Ahmed, B Alzahrani, N Jouini, MM Hessien, S Ataya, The Role of Orientation and Temperature on the Mechanical Properties of a 20 Years Old Wind Turbine Blade GFR Composite, Polymers 13 (2021), 1144.  Doi: https://doi.org/10.3390/polym13071144

3.426

Q1

28

M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, A. Mahdy, N. A. Alsaleh, E. Ahmed, Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020. Metals 2021, 11, 68. doi: 10.3390/met11010068

2.117

Q1

27

M.M.Z. Ahmed, M.M. El-Sayed Seleman, Z. Zidan, R. M. Ramadan, S. Ataya, N. A. Alsaleh, Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints. Metals 2021, 11, 128. doi: 10.3390/met11010128

2.117

Q1

26

M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, T. Allam, N. A. Alsaleh, E. Ahmed, Grain Structure, Crystallographic Texture, and Hardening Behavior of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14. Metals (2021), 11 (181. doi: 10.3390/met11020181

2.117

Q1

25

A Bakkar, S Ataya, O. Badr,  Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer, Journal of Petroleum and Mining Engineering 22 (2020) 21-25. DOI: 10.21608/jpme.2020.22711.1023

NA

24
  • Fahamsyah H. Latief, Naser A. Alsaleh, Nashmi Alrasheedi, Sabbah Ataya, Effects of Oxidation and Alumina Addition on the Physical and Mechanical Properties of Ti/Al2O3 Composites Prepared by Semi-powder Metallurgy Method, Oxidation of Metals 92 (2019) 561–572. DOI: 10.1007/s11085-019-09923-z

1.805 Q2

23

Ashraf Bakkar, Mohamed Ahmed, Naser Alsaleh, Mohamed Alnagar, Sabbah Ataya, Microstructure, Wear, and Corrosion Characterization of High TiC Content Inconel 625 Matrix Composites, Journal of Materials Research and Technology 8 (2019) 1102-1110. https://doi.org/10.1016/j.jmrt.2018.09.001

3.398

Q1

22

Sabbah Ataya, Naser Alsaleh, Mohamed M. El-Sayed Seleman, Strength and Wear Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers, Acta Metallurgica Sinica (English Letters) 32 (2019) 31-40.  https://doi.org/10.1007/s40195-018-0771-z

1.341

Q2

21

Mohamed M. El-Sayed Seleman, Mohamed M.Z. Ahmed, Sabbah Ataya, Microstructure and Mechanical Properties of Hot Extruded 6016 Aluminum Alloy/Graphite Composites, J. Mate. Sci. and Technol, 34 (2018) 1580-1591. DOI: 10.1016/j.jmst.2018.03.004

2.764

Q1

20

M.M.Z. Ahmed, Sabbah Ataya, M.M. El-Sayed Seleman, H.R. Ammar, Essam Ahmed, Friction stir welding of similar and dissimilar AA7075 and AA5083, Journal of Materials Processing Technology 242 (2017) 77-91. DOI: 10.1016/j.jmatprotec.2016.11.024

3.147

Q1

19

Adel A. Abdel-Wahab, Sabbah Ataya, Vadim V. Silberschmidt, Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling, Polymer Testing 58 (2017) 86-95. DOI: 10.1016/j.polymertesting.2016.12.016

2.464

Q1

18

Ahmed E. Hannora, Sabbah Ataya,  Structure and compression strength of hydroxyapatite/titania nanocomposites formed by high energy ball milling, Journal of Alloys and Compounds 658 (2016) 222-233. DOI: 10.1016/j.jmatprotec.2016.11.024

3.133

Q1

17

Ashraf Bakkar, Sabbah Ataya, Corrosion behaviour of stainless steel fibre-reinforced copper metal matrix composite with reference to electrochemical response of its constituents, Corrosion Science 85 (2014) 343-351. DOI: 10.1016/j.corsci.2014.04.037

4.422

Q1

16

Sabbah Ataya, Mohamed M.Z. Ahmed, Damages of wind turbine blade trailing edge: Forms, location, and root causes, Engineering Failure Analysis 35 (December 2013) 480-488. DOI: 10.1016/j.engfailanal.2013.05.011

1.13

Q1

15

S. Ataya, E. El-Magd: “Quasi-static behavior of Mg-alloys with and without short-fiber reinforcement”, J. Theoretical and Applied Fracture Mechanics, 47 (2007) 102-112. DOI: 10.1016/j.tafmec.2006.11.002

2.097

Q1

14

M. Korthäuer, S. Ataya, E. El-Magd: “Effects of the deformed volume, volume fraction, and particle size of the deformation behavior of W/Cu composites”, J. Theoretical and applied fracture mechanics, 46 (2006) 38-45. DOI: 10.1016/j.tafmec.2006.05.002

2.097

Q1

13

T. Sadowski, S. Ataya, K. Nakonieczny: Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side – Comparison of two applied methods for problem solution, J. Computational Materials Science, Vol. 45 (2009) 624-632. DOI: 10.1016/j.commatsci.2008.07.011

2.376

Q2

12

S. Ataya, E. El-Magd: “Modeling the creep behavior of Mg alloys with and without short-fiber reinforcement”, J. Computational Materials Science, 39 (2007) 155-159. DOI: 10.1016/j.commatsci.2006.03.020

2.376

Q2

11

M. Korthäuer, S. Ataya, A. Salem, E. El-Magd: “Size effects on the deformation behaviour of W-Cu composites under shear loading”, J. Computational Materials Science, 39 (2007) 219-223.

2.376

Q2

10

S. Ataya, M. Korthäuer, E. El-Magd: Effects of the deformed volume and the volume fraction on the local deformation behavior of W/Cu composites, Key Eng. Mater. 345-346 (2007) pp 1205-1208. DOI: 10.4028/www.scientific.net/KEM.345-346.1205

0.224

Q3

9

M. Harhash, S. Ataya, M. Abd El Hady, N. El Mahallawy, Microstructural characterization and kinetics of diffusion bonded AZ31/Al by hot press cladding, Materialswissenschaft und Werkstofftechnick 45 (2014) 15-20.

 DOI: 10.1002/mawe.201400194

0.524

Q4

8

M. Korthäuer, S. Ataya, E. El-Magd: “Scaling effects on the deformation behaviour of W/Cu composite materials under dynamic loading”, J. Phys. IV France 134 (2006) 157-162. DOI: 10.1051/jp4:2006134024

0.35

Q4

7

Mohamed H. Safa, Sabbah Ataya, Rashad M. Ramadan, Samir Ibrahim, Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel, J. Pet. & Min. Eng.  20 (1) (2017).

National journal

6

I. I. Elgammal, S. Ataya, R. M. Ramadan, G. Megahed, Modification of the bar slitting roll pass design using FE simulation, J. Pet. & Min. Eng.  19 (2) (2016)

National journal

5

Ahmed Refaee, Sabbah Ataya, Samir Ibrahim, Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties, J. Pet. & Min. Eng. 17 (1) (2014) 47-53

National journal

4

Ahmed El-Kawas, Sabbah Ataya, Samir Ibrahim, Industrial Production of Fine Grained Ferrite in Low-Carbon Steel, J. Pet. & Min. Eng. 17 (1) (2014) 16-23

National journal

3

Sabbah Ataya, M.M.Z. Ahmed, Essam Ahmed, An Investigation of Damages in Low Power Wind Turbine Blades, Journal of Petroleum and Mining Engineering 16 (2) (2013)

National journal

2

M. Seleman, and S. Ataya "Microstructure and Wear Behavior of Mg-Alloy AE42 Reinforced with 23 VOL. % Carbon Short Fibers" J. Petr. Min. Eng, 14 (1) (2011) 59-72.

National journal

1

S. Eassa, S. Ataya, R. Ramadan and M. Elzeky, Low Cycle Bending Fatigue Behavior of Aluminum Alloy 5083 in Air and in 3.5% NaCl Solution, J. Petr. Min. Eng, 13 (1) (2010) 83-99

National journal

 

Conference papers (12)

  1. Ahmed Elkawas, Sabbah Ataya, Samir Ibrahim, Effect of Rolling Conditions on Ferrite Refinement of Low-carbon Steel, The International Conference on Engineering and Technology, Materials Track, 10-11 Oct. 2012, GUC, Cairo, DOI:10.1109/ICEngTechnol.2012.6396159
  2. S. Ataya, and S. Ibrahim, On the Lüder's Strain of Static Strain Aged Dual Phase Steel, The International Conference on Engineering and Technology, Materials Track, 10-11 Oct. 2012, GUC, Cairo, DOI: 10.1109/ICEngTechnol.2012.6396125
  3. Sabbah Ataya, Mohamed M. EL-Sayed Seleman, Microstructure Stability of CuZn37 Brass, 14th International Materials Symposium (IMSP’2012) 10-12 October 2012, Pamukkale University – Denizli - Turkey.
  4. S. Ataya, MMZ Ahmed, Mechanical Evaluation of 20 Years Old Wind Turbine Blades Composites” 14th International Materials Symposium (IMSP’2012) 10-12 October 2012, Pamukkale University – Denizli - Turkey.
  5. Sabbah Ataya and Mohamed M.Z. Ahmed: Forms of discontinuities in 100 KW and 300 KW Wind Turbine, 10th World Wind Energy Conf. (WWEC10), Cairo, 31 Oct. - 2 Nov. 2011.
  6. S. Ataya, T. Sadowski: FE-simulation of thermal shock in layered ceramic composites, 11th Int. Conf. Mining, Petroleum and Metallurgical Eng. (MPM11), 15-19 March 2009, Sharm El-Shiekh.
  7. S. Ataya, E. El-Magd: “Modeling and FE Simulation the creep behavior of Mg alloys with and without short-fiber reinforcement”, International Conf. on Mesomechanics, Cairo, January 28-31 (2008).
  8. S. Ataya, E. El-Magd: Experimental Investigation and Modeling the Quasi-Static Behaviour of Mg-Alloys with and without Short Fiber Reinforcement, proceeding of the first afro asian conf. on adv. mater. sci. & tech., Cairo (2006) 17-29
  9. S. Ataya, E. El-Magd: “Experimental investigation and FE-simulation of the mechanical behavior of AE42 and AZ91 reinforced by carbon short fibres in: “Materials for Safety and Health”, ed. G. S. Sih and T. Vu-Kahn, Proceedings of the 7th International Conference on Mesomechanics, Montreal (2005) 147-155.
  10. S. Ataya, E. El-Magd: “Ermüdungsverhalten von kurzfasernverstärkten Mg-Legierungen“, in: „Herausforderung neuer Werkstoffe an die Forschung und Werkstoffprüfung“, Ed. W. Grellmann, DVM 2005, ISSN 1861-8154, 2005, Tagungsband Werkstoffprüfung (2005) 227-232
  11. E. El-Magd, M. Korthäuer, S. Ataya: “Experimental and numerical investigations of the specimen size effects on the flow behaviour of W/Cu composites” in "Multiscaling in applied science and emerging technology", Ed. G. C. Sih, Th. B. Kermanidis and Sp. G. Pantelakis, Proceedings of the 6th international conference for Mesomechanics, Patras (2004) 149-154.
  12. S. Ataya, S. Mielke, E. El-Magd: Creep behavior of Mg-Alloys AE42 and AZ91 reinforced with carbon short fibers in “Magnesium Alloys and their Applications” Ed. K.U. Kainer, Wiley-VCH Verlag, Weinheim (2003) 384-389.

 

(7) Book and Book chapters

  1. Sabbah Ataya, Load Carrying Capacity and Microstructure of Resisitance Spot Welded Dual-Phase (DP600) Steel, Characterization of Minerals, Metals, and Materials, Edit. John S. Carpenter et. al, TMS, The Minerals, Metals and Materials Society (2014) 297-304.
  2. S. Ataya and T. Emde, Friction Coefficients on Compression Testing of AA6060 and 42CrMo4 with Different Lubrication Conditions, in light metals, Edited by John Grandfield, TMS, The Minerals, Metals and Materials Society,(2014) 377-382.
  3. E. El-Magd, M. Korthäuer, S. Ataya, S. G. Schulz (2009) "Experimentelle und numerische Untersuchung der Größeneinflüsse auf das Fließverhalten von W/Cu-Teilchenverbundwerkstoffen und Stählen" in Grösseneinflüesse bei Fertigungsprozessen, F. Vollertsen, BIAS Bremen ISBN: 978-3-933762-0, 241-266
  4. S. Ataya: „Mechanisches Verhalten kurzfaserverstärkter Mg-Legierungen“, Dr.-Ing. Dissertation, Mainz-Verlag, Aachen, 2006, ISBN: 3-86130-823-1.
  5. M. Korthäuer, S. Ataya, E. El-Magd: Experimentelle und numerische Untersuchungen von Größeneinflüssen von W/Cu-Teilchenverbundwerkstoffen in Strahltechnik, ed. F. Vollertsen, BIAS Verlag, Bremen, Vol. 27 (2005) 167-178
  6. M. Korthäuer, S. Ataya, E. El-Magd: Scaling effects on the deformation behaviour of W/Cu sintered composite materials, BIAS Verlag, Bremen, Vol. 24 (2003) 57-64
  7. M. Korthäuer, S. Ataya, E. El-Magd: Bestimmung des Fließverhaltens durch Stauch- und Scherversuche an W-Cu Teilchenverbundwerkstoffen unter Berücksichtigung von Größeneinflüssen in „Herausforderung durch den industriellen Fortschritt“, Ed. O. W. Buchholz und S. Geisler, Verlag Stahleisen (2003) 151-157.

Total Journal papers (54)

#

Publications

Impact factor

54

Ibrahim Sari, Mahmoud Ahmadein, Sabbah Ataya, Lakhdar Hachani, Kader Zaidat, Nashmi Alrasheedi, Menghuai Wu and Abdellah Kharicha, Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate, Materials 2023, 16(21),

3.4

Q2

53

Xu Song, Naser Alsaleh, D. Thresh kumar, Murugesan Palaniappan, Abdullah Abdullatif Aly Elfar, Sabbah Ataya, Enabling customer participation for the implementation of sustainable manufacturing, Journal of Cleaner Production, 2024, 140803, https://doi.org/10.1016/j.jclepro.2024.140803.

 

11.1, Q1

52

Mohamed M. El-Sayed Seleman, Sabbah Ataya, Hayam A. Aly, Barun, Haldar, Naser A. Alsaleh, Mohamed M. Z. Ahmed, Ashraf Bakkar, Khaled M.Ibrahim Effect of Si Content on the Dry and Wet Sliding Wear Behavior of the Developed Ti-15Mo-(0-2) Si Alloys for Biomedical Applications, Metal 2023, 13(11), 1861; https://doi.org/10.3390/met13111861

2.9

Q2

51

Nashmi H Alrasheedi, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Sabbah Ataya, Fatigue and Fracture Behaviors of Short Carbon Fiber Reinforced Squeeze Cast AZ91 at 20° C and 250° C, Crystals 2023, 13(10), 1469; https://doi.org/10.3390/cryst13101469

2.7

Q2

50

Naser A Alsaleh, Akrum Abdul-Latif, Fahamsyah H Latief, Mohamed MZ Ahmed, Sabbah Ataya, Plastic Behavior of Metals and Their Sensitivity to Grain Size: Comparison between Two Multiscale Approaches, Crystals 2023, 13(10), 1463; https://doi.org/10.3390/cryst13101463

2.7

Q2

49

Mahmoud Ahmadein, Naser A Alsaleh, Mahmoud Ahmed Elsayed, Sabbah Ataya, Analysis of the Effect of Simultaneous Melt Shearing and Cooling on Grain Formation and Rheology of A356 Aluminum Alloy, Crystals 2023, 13(9), 1345; https://doi.org/10.3390/cryst13091345

2.7

Q2

48

H  illol  . Joardar,   Nitai .Sundaor S.  Das, Barun . Haldar, Kalipada. P. Maity, Naser Abdulrahman Alsaleh and Sabbah Ataya, An Upper Bound Energy Formulation of Free-Chip Machining with Flat Chips and an Alternative Method of Determination of Cutting Forces without Using the Merchant’s Circle Diagram, Machines 2023, 11(9), 853; https://doi.org/10.3390/machines11090853

2.899

Q2

47

Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Sabbah Ataya, Mohamed MZ Ahmed, Khamis Essa, Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion, Micromachines 2023, 14(8), 1642; https://doi.org/10.3390/mi14081642

3.4

Q2

46

Solomon Bayu Huluka, Rachid Baleh, Naser A Alsaleh, Adel Alfozan, Akrum Abdul-Latif, Sabbah Ataya, Effect of a Multiaxial Load of Reverse Torsion on Open-Cell Aluminum Foams Behavior, Materials 2023, 16(14), 5136; https://doi.org/10.3390/ma16145136

3.4

Q2

45

Mohamed IA Habba, Naser A Alsaleh, Takwa E Badran, Mohamed M El-Sayed Seleman, Sabbah Ataya, Ahmed E El-Nikhaily, Akrum Abdul-Latif, Mohamed MZ Ahmed, Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect, Materials 2023, 16(14), 5124; https://doi.org/10.3390/ma16145124

3.4

Q2

44

Naser A Alsaleh, Mohamed M El-Sayed Seleman, Ahmed MM Hassan, Mohamed MZ Ahmed, Sabbah Ataya, Fahamsyah H Latief, Akrum Abdul-Latif, Mohamed IA Habba, Additively Manufactured Parts from AA2011-T6 Large-Diameter Feedstocks Using Friction Stir Deposition, Materials 2023, 16(14), 4904; https://doi.org/10.3390/ma16144904

3.4

Q2

43

Nashmi H Alrasheedi, Sabbah Ataya, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Tensile Deformation and Fracture of Unreinforced AZ91 and Reinforced AZ91-C at Temperatures up to 300 °C, Materials 2023, 16(13), 4785; https://doi.org/10.3390/ma16134785

3.4

Q2

42

Alessandro Abena, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Hybrid Finite Element–Smoothed Particle Hydrodynamics Modelling for Optimizing Cutting Parameters in CFRP Composites, Polymers 2023, 15(13), 2789; https://doi.org/10.3390/polym15132789

4.967

Q1

41

Ho Lam Au-Yeung, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A. Alsaleh, Mohamed M. Z. Ahmed, and Khamis Essa, Non-Destructive Disassembly of Interference Fit under Wear Conditions for Sustainable Remanufacturing, Machines 2023, 11 (5), 538; https://doi.org/10.3390/machines11050538

2.899

Q2

40

  Naser A Alsaleh, Sabbah Ataya, Fahamsyah H Latief, Mohamed MZ Ahmed, Ahmed Ataya, Akrum Abdul-Latif, LCF and HCF of Short Carbon Fibers Reinforced AE42 Mg Alloy, Materials 2023, 16(10), 3686; https://doi.org/10.3390/ma16103686

3.748

Q1

39

Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites, Polymers 2023, 15(8), 1897; https://doi.org/10.3390/polym15081897

4.967

Q1

38

Rashid Khan, Sabbah Ataya, Islam Elgammal, Khamis Essa, Reduced Slit Rolling Power in Rebar Steel Production, Materials 2023, 16(5), 2104; https://doi.org/10.3390/ma16052104

3.748

Q1

37

Mohamed MZ Ahmed, Ahmed RS Essa, Sabbah Ataya, Mohamed M El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Joffin J Ponnore, Abdelkarim YA Mohamed, Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties, Materials 2023, 16(5), 2031; https://doi.org/10.3390/ma16052031

3.748

Q1

36

Mohamed Abd Elaziz, Mahmoud Ahmadein, Sabbah Ataya, Naser Alsaleh, Agostino Forestiero, Ammar H Elsheikh: A Quantum-Based Chameleon Swarm for Feature Selection, Mathematics (2022), 10(19), 3606; https://doi.org/10.3390/math10193606

2.59

35

Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Ahmed M Soliman, Naser A Alsaleh, Mohamed IA Habba:

Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short Carbon Fibers, Materials (2022),15(14), 4841; https://doi.org/10.3390/ma15144841

3.748

Q1

34

Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Yousef GY Elshaghoul, Mohamed IA Habba: Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers,

Materials (2022), 15(14), 4818;https://doi.org/10.3390/ma15144818

3.748

Q1

33

Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed MZ Ahmed, Ahmed MM Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed IA Habba:

The Additive Manufacturing of Aluminum Matrix Nano Al2O3 Composites Produced via Friction Stir Deposition Using Different Initial Material Conditions, Materials (2022), 15(8), 2926; https://doi.org/10.3390/ma15082926

3.748

Q1

32

Sabbah Ataya, Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef GY Elshaghoul, Mohamed IA Habba:

Effective Range of FSSW Parameters for High Load-Carrying Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints, Materials (2022), 15(4), 1394; https://doi.org/10.3390/ma15041394

3.748

Q1

31

Mohamed I. A. Habba Mohamed M. Z. Ahmed,Khalil Hajlaoui, Mohamed M. El-Sayed Seleman, Mahmoud F. Elkady, Sabbah Ataya,Fahamsyah H. Latief, Mohamed I. A. Habba, Microstructure and Mechanical Properties of Friction Stir Welded 2205 Duplex Stainless Steel Butt Joints,

Materials (2021), 14(21), 6640; https://doi.org/10.3390/ma14216640

3.748

Q1

30

Mohamed MZ Ahmed, Mohamed IA Habba, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily, Bobbin Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process Parameters on Temperature Distribution and Joints’ Properties,

Materials (2021), 14(16), 4585; https://doi.org/10.3390/ma14164585

3.748

Q1

29

MMZ Ahmed, B Alzahrani, N Jouini, MM Hessien, S Ataya, The Role of Orientation and Temperature on the Mechanical Properties of a 20 Years Old Wind Turbine Blade GFR Composite, Polymers 13 (2021), 1144.  Doi: https://doi.org/10.3390/polym13071144

3.426

Q1

28

M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, A. Mahdy, N. A. Alsaleh, E. Ahmed, Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020. Metals 2021, 11, 68. doi: 10.3390/met11010068

2.117

Q1

27

M.M.Z. Ahmed, M.M. El-Sayed Seleman, Z. Zidan, R. M. Ramadan, S. Ataya, N. A. Alsaleh, Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints. Metals 2021, 11, 128. doi: 10.3390/met11010128

2.117

Q1

26

M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, T. Allam, N. A. Alsaleh, E. Ahmed, Grain Structure, Crystallographic Texture, and Hardening Behavior of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14. Metals (2021), 11 (181. doi: 10.3390/met11020181

2.117

Q1

25

A Bakkar, S Ataya, O. Badr,  Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer, Journal of Petroleum and Mining Engineering 22 (2020) 21-25. DOI: 10.21608/jpme.2020.22711.1023

NA

24
  • Fahamsyah H. Latief, Naser A. Alsaleh, Nashmi Alrasheedi, Sabbah Ataya, Effects of Oxidation and Alumina Addition on the Physical and Mechanical Properties of Ti/Al2O3 Composites Prepared by Semi-powder Metallurgy Method, Oxidation of Metals 92 (2019) 561–572. DOI: 10.1007/s11085-019-09923-z

1.805 Q2

23

Ashraf Bakkar, Mohamed Ahmed, Naser Alsaleh, Mohamed Alnagar, Sabbah Ataya, Microstructure, Wear, and Corrosion Characterization of High TiC Content Inconel 625 Matrix Composites, Journal of Materials Research and Technology 8 (2019) 1102-1110. https://doi.org/10.1016/j.jmrt.2018.09.001

3.398

Q1

22

Sabbah Ataya, Naser Alsaleh, Mohamed M. El-Sayed Seleman, Strength and Wear Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers, Acta Metallurgica Sinica (English Letters) 32 (2019) 31-40.  https://doi.org/10.1007/s40195-018-0771-z

1.341

Q2

21

Mohamed M. El-Sayed Seleman, Mohamed M.Z. Ahmed, Sabbah Ataya, Microstructure and Mechanical Properties of Hot Extruded 6016 Aluminum Alloy/Graphite Composites, J. Mate. Sci. and Technol, 34 (2018) 1580-1591. DOI: 10.1016/j.jmst.2018.03.004

2.764

Q1

20

M.M.Z. Ahmed, Sabbah Ataya, M.M. El-Sayed Seleman, H.R. Ammar, Essam Ahmed, Friction stir welding of similar and dissimilar AA7075 and AA5083, Journal of Materials Processing Technology 242 (2017) 77-91. DOI: 10.1016/j.jmatprotec.2016.11.024

3.147

Q1

19

Adel A. Abdel-Wahab, Sabbah Ataya, Vadim V. Silberschmidt, Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling, Polymer Testing 58 (2017) 86-95. DOI: 10.1016/j.polymertesting.2016.12.016

2.464

Q1

18

Ahmed E. Hannora, Sabbah Ataya,  Structure and compression strength of hydroxyapatite/titania nanocomposites formed by high energy ball milling, Journal of Alloys and Compounds 658 (2016) 222-233. DOI: 10.1016/j.jmatprotec.2016.11.024

3.133

Q1

17

Ashraf Bakkar, Sabbah Ataya, Corrosion behaviour of stainless steel fibre-reinforced copper metal matrix composite with reference to electrochemical response of its constituents, Corrosion Science 85 (2014) 343-351. DOI: 10.1016/j.corsci.2014.04.037

4.422

Q1

16

Sabbah Ataya, Mohamed M.Z. Ahmed, Damages of wind turbine blade trailing edge: Forms, location, and root causes, Engineering Failure Analysis 35 (December 2013) 480-488. DOI: 10.1016/j.engfailanal.2013.05.011

1.13

Q1

15

S. Ataya, E. El-Magd: “Quasi-static behavior of Mg-alloys with and without short-fiber reinforcement”, J. Theoretical and Applied Fracture Mechanics, 47 (2007) 102-112. DOI: 10.1016/j.tafmec.2006.11.002

2.097

Q1

14

M. Korthäuer, S. Ataya, E. El-Magd: “Effects of the deformed volume, volume fraction, and particle size of the deformation behavior of W/Cu composites”, J. Theoretical and applied fracture mechanics, 46 (2006) 38-45. DOI: 10.1016/j.tafmec.2006.05.002

2.097

Q1

13

T. Sadowski, S. Ataya, K. Nakonieczny: Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side – Comparison of two applied methods for problem solution, J. Computational Materials Science, Vol. 45 (2009) 624-632. DOI: 10.1016/j.commatsci.2008.07.011

2.376

Q2

12

S. Ataya, E. El-Magd: “Modeling the creep behavior of Mg alloys with and without short-fiber reinforcement”, J. Computational Materials Science, 39 (2007) 155-159. DOI: 10.1016/j.commatsci.2006.03.020

2.376

Q2

11

M. Korthäuer, S. Ataya, A. Salem, E. El-Magd: “Size effects on the deformation behaviour of W-Cu composites under shear loading”, J. Computational Materials Science, 39 (2007) 219-223.

2.376

Q2

10

S. Ataya, M. Korthäuer, E. El-Magd: Effects of the deformed volume and the volume fraction on the local deformation behavior of W/Cu composites, Key Eng. Mater. 345-346 (2007) pp 1205-1208. DOI: 10.4028/www.scientific.net/KEM.345-346.1205

0.224

Q3

9

M. Harhash, S. Ataya, M. Abd El Hady, N. El Mahallawy, Microstructural characterization and kinetics of diffusion bonded AZ31/Al by hot press cladding, Materialswissenschaft und Werkstofftechnick 45 (2014) 15-20.

 DOI: 10.1002/mawe.201400194

0.524

Q4

8

M. Korthäuer, S. Ataya, E. El-Magd: “Scaling effects on the deformation behaviour of W/Cu composite materials under dynamic loading”, J. Phys. IV France 134 (2006) 157-162. DOI: 10.1051/jp4:2006134024

0.35

Q4

7

Mohamed H. Safa, Sabbah Ataya, Rashad M. Ramadan, Samir Ibrahim, Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel, J. Pet. & Min. Eng.  20 (1) (2017).

National journal

6

I. I. Elgammal, S. Ataya, R. M. Ramadan, G. Megahed, Modification of the bar slitting roll pass design using FE simulation, J. Pet. & Min. Eng.  19 (2) (2016)

National journal

5

Ahmed Refaee, Sabbah Ataya, Samir Ibrahim, Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties, J. Pet. & Min. Eng. 17 (1) (2014) 47-53

National journal

4

Ahmed El-Kawas, Sabbah Ataya, Samir Ibrahim, Industrial Production of Fine Grained Ferrite in Low-Carbon Steel, J. Pet. & Min. Eng. 17 (1) (2014) 16-23

National journal

3

Sabbah Ataya, M.M.Z. Ahmed, Essam Ahmed, An Investigation of Damages in Low Power Wind Turbine Blades, Journal of Petroleum and Mining Engineering 16 (2) (2013)

National journal

2

M. Seleman, and S. Ataya "Microstructure and Wear Behavior of Mg-Alloy AE42 Reinforced with 23 VOL. % Carbon Short Fibers" J. Petr. Min. Eng, 14 (1) (2011) 59-72.

National journal

1

S. Eassa, S. Ataya, R. Ramadan and M. Elzeky, Low Cycle Bending Fatigue Behavior of Aluminum Alloy 5083 in Air and in 3.5% NaCl Solution, J. Petr. Min. Eng, 13 (1) (2010) 83-99

National journal

 

Conference papers (12)

  1. Ahmed Elkawas, Sabbah Ataya, Samir Ibrahim, Effect of Rolling Conditions on Ferrite Refinement of Low-carbon Steel, The International Conference on Engineering and Technology, Materials Track, 10-11 Oct. 2012, GUC, Cairo, DOI:10.1109/ICEngTechnol.2012.6396159
  2. S. Ataya, and S. Ibrahim, On the Lüder's Strain of Static Strain Aged Dual Phase Steel, The International Conference on Engineering and Technology, Materials Track, 10-11 Oct. 2012, GUC, Cairo, DOI: 10.1109/ICEngTechnol.2012.6396125
  3. Sabbah Ataya, Mohamed M. EL-Sayed Seleman, Microstructure Stability of CuZn37 Brass, 14th International Materials Symposium (IMSP’2012) 10-12 October 2012, Pamukkale University – Denizli - Turkey.
  4. S. Ataya, MMZ Ahmed, Mechanical Evaluation of 20 Years Old Wind Turbine Blades Composites” 14th International Materials Symposium (IMSP’2012) 10-12 October 2012, Pamukkale University – Denizli - Turkey.
  5. Sabbah Ataya and Mohamed M.Z. Ahmed: Forms of discontinuities in 100 KW and 300 KW Wind Turbine, 10th World Wind Energy Conf. (WWEC10), Cairo, 31 Oct. - 2 Nov. 2011.
  6. S. Ataya, T. Sadowski: FE-simulation of thermal shock in layered ceramic composites, 11th Int. Conf. Mining, Petroleum and Metallurgical Eng. (MPM11), 15-19 March 2009, Sharm El-Shiekh.
  7. S. Ataya, E. El-Magd: “Modeling and FE Simulation the creep behavior of Mg alloys with and without short-fiber reinforcement”, International Conf. on Mesomechanics, Cairo, January 28-31 (2008).
  8. S. Ataya, E. El-Magd: Experimental Investigation and Modeling the Quasi-Static Behaviour of Mg-Alloys with and without Short Fiber Reinforcement, proceeding of the first afro asian conf. on adv. mater. sci. & tech., Cairo (2006) 17-29
  9. S. Ataya, E. El-Magd: “Experimental investigation and FE-simulation of the mechanical behavior of AE42 and AZ91 reinforced by carbon short fibres in: “Materials for Safety and Health”, ed. G. S. Sih and T. Vu-Kahn, Proceedings of the 7th International Conference on Mesomechanics, Montreal (2005) 147-155.
  10. S. Ataya, E. El-Magd: “Ermüdungsverhalten von kurzfasernverstärkten Mg-Legierungen“, in: „Herausforderung neuer Werkstoffe an die Forschung und Werkstoffprüfung“, Ed. W. Grellmann, DVM 2005, ISSN 1861-8154, 2005, Tagungsband Werkstoffprüfung (2005) 227-232
  11. E. El-Magd, M. Korthäuer, S. Ataya: “Experimental and numerical investigations of the specimen size effects on the flow behaviour of W/Cu composites” in "Multiscaling in applied science and emerging technology", Ed. G. C. Sih, Th. B. Kermanidis and Sp. G. Pantelakis, Proceedings of the 6th international conference for Mesomechanics, Patras (2004) 149-154.
  12. S. Ataya, S. Mielke, E. El-Magd: Creep behavior of Mg-Alloys AE42 and AZ91 reinforced with carbon short fibers in “Magnesium Alloys and their Applications” Ed. K.U. Kainer, Wiley-VCH Verlag, Weinheim (2003) 384-389.

 

(7) Book and Book chapters

  1. Sabbah Ataya, Load Carrying Capacity and Microstructure of Resisitance Spot Welded Dual-Phase (DP600) Steel, Characterization of Minerals, Metals, and Materials, Edit. John S. Carpenter et. al, TMS, The Minerals, Metals and Materials Society (2014) 297-304.
  2. S. Ataya and T. Emde, Friction Coefficients on Compression Testing of AA6060 and 42CrMo4 with Different Lubrication Conditions, in light metals, Edited by John Grandfield, TMS, The Minerals, Metals and Materials Society,(2014) 377-382.
  3. E. El-Magd, M. Korthäuer, S. Ataya, S. G. Schulz (2009) "Experimentelle und numerische Untersuchung der Größeneinflüsse auf das Fließverhalten von W/Cu-Teilchenverbundwerkstoffen und Stählen" in Grösseneinflüesse bei Fertigungsprozessen, F. Vollertsen, BIAS Bremen ISBN: 978-3-933762-0, 241-266
  4. S. Ataya: „Mechanisches Verhalten kurzfaserverstärkter Mg-Legierungen“, Dr.-Ing. Dissertation, Mainz-Verlag, Aachen, 2006, ISBN: 3-86130-823-1.
  5. M. Korthäuer, S. Ataya, E. El-Magd: Experimentelle und numerische Untersuchungen von Größeneinflüssen von W/Cu-Teilchenverbundwerkstoffen in Strahltechnik, ed. F. Vollertsen, BIAS Verlag, Bremen, Vol. 27 (2005) 167-178
  6. M. Korthäuer, S. Ataya, E. El-Magd: Scaling effects on the deformation behaviour of W/Cu sintered composite materials, BIAS Verlag, Bremen, Vol. 24 (2003) 57-64
  7. M. Korthäuer, S. Ataya, E. El-Magd: Bestimmung des Fließverhaltens durch Stauch- und Scherversuche an W-Cu Teilchenverbundwerkstoffen unter Berücksichtigung von Größeneinflüssen in „Herausforderung durch den industriellen Fortschritt“, Ed. O. W. Buchholz und S. Geisler, Verlag Stahleisen (2003) 151-157.