Prof.Dr
Sabbah Mohamed Selim ATAYA
s.ataya@pme.suezuni.edu.eg
/
/
Sabbah Mohamed Selim ATAYA
Egyptian
English and German
Faculty of petroleum and Mining Engineering
Department of Metallurgical and Materials Engineering
s.ataya@pme.suezuni.edu.sa
Currently (in Leave)
College of Engineering,
Department of Mechanical Engineering,
Al Imam Muhamed Ibn Saud Islamic University, Riyadh, KSA
Tel.:+966 1125 87697
Scopus ID: 56030898500
Scopus Web Page: https://www.scopus.com/authid/detail.uri?authorId=56030898500
Web of science ID: GXH-4615-2022
Web of science ID: https://www.webofscience.com/wos/author/record/H-4336-2012
Google scholar: https://scholar.google.com/citations?user=I_nXDRkAAAAJ&hl=en&oi=ao
Conference papers (12)
(7) Book and Book chapters
Dec. 2005
|
Dr. Eng. Aachen University, Faculty of Mechanical Engineering. Thesis: Mechanical behaviour of short fibers reinforced Mg-Alloys |
Dec. 1995 |
Master: Mechanical Metallurgy, Suez Canal University, Suez. |
Mai 1990 |
Bachelor: Metallurgical Eng., Suez Canal University, Suez. |
Since Dec. 2017 |
Professor: Materials Engineering & Manufacturing, Al Imam Mohammad Ibn Saud Islamic University (IMSIU) |
2014-2017 |
Associate Prof. at Department of Mechanical Engineering, Al Imam Mohammad Ibn Saud Islamic University (IMSIU) |
2013 - 2014 |
Head of Department of Metallurgy and Materials Engineering |
Jan 2013 |
Associate Prof.: Department of Metallurgy & Materials Engineering, Faculty of Petroleum & Mining Eng., Suez University |
2007 -2012 |
Assistant Prof.: Faculty of Petroleum & Mining Eng., Suez University |
01.2006–10-2007 |
Post-doctoral: Departement of materials science „Lehr- und Forschungsgebiet Werkstoffkunde, LFW“ RWTH - Aachen University, Germany. |
01.00 – 12.05 |
Ph.D. Student: at LFW, RWTH (Aachen University) |
02.93 – 06.99
|
Assistant: Department of Metallurgy, Faculty of Petroleum & Mining Eng., Suez, Egypt. |
02.92 – 01.93
|
Assistant: Central Metallurgical Research and Development Institute (CMRDI), Welding Dept., Eltibbin, Cairo. |
Canada, South Korea, Switzerland, Portugal, Poland, France, Belgian, Nederland, Luxemburg, Denmark, KSA
Web of science ID: GXH-4615-2022
Web of science ID: https://www.webofscience.com/wos/author/record/H-4336-2012
Scopus ID: 56030898500
Scopus Web Page: https://www.scopus.com/authid/detail.uri?authorId=56030898500
Scholarships & Fellowship
Referee & Review Activities:
Grants & Projects
A- In KSA
B- In Egypt
C. In Germany (participation in the following research projects)
Books and Book chapters
Dec. 2005
|
Dr. Eng. Aachen University, Faculty of Mechanical Engineering. Thesis: Mechanical behaviour of short fibers reinforced Mg-Alloys |
Dec. 1995 |
Master: Mechanical Metallurgy, Suez Canal University, Suez. |
Mai 1990 |
Bachelor: Metallurgical Eng., Suez Canal University, Suez. |
Total Journal papers (54)
# |
Publications |
Impact factor |
54 |
Ibrahim Sari, Mahmoud Ahmadein, Sabbah Ataya, Lakhdar Hachani, Kader Zaidat, Nashmi Alrasheedi, Menghuai Wu and Abdellah Kharicha, Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate, Materials 2023, 16(21), |
3.4 Q2 |
53 |
Xu Song, Naser Alsaleh, D. Thresh kumar, Murugesan Palaniappan, Abdullah Abdullatif Aly Elfar, Sabbah Ataya, Enabling customer participation for the implementation of sustainable manufacturing, Journal of Cleaner Production, 2024, 140803, https://doi.org/10.1016/j.jclepro.2024.140803.
|
11.1, Q1 |
52 |
Mohamed M. El-Sayed Seleman, Sabbah Ataya, Hayam A. Aly, Barun, Haldar, Naser A. Alsaleh, Mohamed M. Z. Ahmed, Ashraf Bakkar, Khaled M.Ibrahim Effect of Si Content on the Dry and Wet Sliding Wear Behavior of the Developed Ti-15Mo-(0-2) Si Alloys for Biomedical Applications, Metal 2023, 13(11), 1861; https://doi.org/10.3390/met13111861 |
2.9 Q2 |
51 |
Nashmi H Alrasheedi, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Sabbah Ataya, Fatigue and Fracture Behaviors of Short Carbon Fiber Reinforced Squeeze Cast AZ91 at 20° C and 250° C, Crystals 2023, 13(10), 1469; https://doi.org/10.3390/cryst13101469 |
2.7 Q2 |
50 |
Naser A Alsaleh, Akrum Abdul-Latif, Fahamsyah H Latief, Mohamed MZ Ahmed, Sabbah Ataya, Plastic Behavior of Metals and Their Sensitivity to Grain Size: Comparison between Two Multiscale Approaches, Crystals 2023, 13(10), 1463; https://doi.org/10.3390/cryst13101463 |
2.7 Q2 |
49 |
Mahmoud Ahmadein, Naser A Alsaleh, Mahmoud Ahmed Elsayed, Sabbah Ataya, Analysis of the Effect of Simultaneous Melt Shearing and Cooling on Grain Formation and Rheology of A356 Aluminum Alloy, Crystals 2023, 13(9), 1345; https://doi.org/10.3390/cryst13091345 |
2.7 Q2 |
48 |
H illol . Joardar, Nitai .Sundaor S. Das, Barun . Haldar, Kalipada. P. Maity, Naser Abdulrahman Alsaleh and Sabbah Ataya, An Upper Bound Energy Formulation of Free-Chip Machining with Flat Chips and an Alternative Method of Determination of Cutting Forces without Using the Merchant’s Circle Diagram, Machines 2023, 11(9), 853; https://doi.org/10.3390/machines11090853 |
2.899 Q2 |
47 |
Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Sabbah Ataya, Mohamed MZ Ahmed, Khamis Essa, Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion, Micromachines 2023, 14(8), 1642; https://doi.org/10.3390/mi14081642 |
3.4 Q2 |
46 |
Solomon Bayu Huluka, Rachid Baleh, Naser A Alsaleh, Adel Alfozan, Akrum Abdul-Latif, Sabbah Ataya, Effect of a Multiaxial Load of Reverse Torsion on Open-Cell Aluminum Foams Behavior, Materials 2023, 16(14), 5136; https://doi.org/10.3390/ma16145136 |
3.4 Q2 |
45 |
Mohamed IA Habba, Naser A Alsaleh, Takwa E Badran, Mohamed M El-Sayed Seleman, Sabbah Ataya, Ahmed E El-Nikhaily, Akrum Abdul-Latif, Mohamed MZ Ahmed, Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect, Materials 2023, 16(14), 5124; https://doi.org/10.3390/ma16145124 |
3.4 Q2 |
44 |
Naser A Alsaleh, Mohamed M El-Sayed Seleman, Ahmed MM Hassan, Mohamed MZ Ahmed, Sabbah Ataya, Fahamsyah H Latief, Akrum Abdul-Latif, Mohamed IA Habba, Additively Manufactured Parts from AA2011-T6 Large-Diameter Feedstocks Using Friction Stir Deposition, Materials 2023, 16(14), 4904; https://doi.org/10.3390/ma16144904 |
3.4 Q2 |
43 |
Nashmi H Alrasheedi, Sabbah Ataya, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Tensile Deformation and Fracture of Unreinforced AZ91 and Reinforced AZ91-C at Temperatures up to 300 °C, Materials 2023, 16(13), 4785; https://doi.org/10.3390/ma16134785 |
3.4 Q2 |
42 |
Alessandro Abena, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Hybrid Finite Element–Smoothed Particle Hydrodynamics Modelling for Optimizing Cutting Parameters in CFRP Composites, Polymers 2023, 15(13), 2789; https://doi.org/10.3390/polym15132789 |
4.967 Q1 |
41 |
Ho Lam Au-Yeung, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A. Alsaleh, Mohamed M. Z. Ahmed, and Khamis Essa, Non-Destructive Disassembly of Interference Fit under Wear Conditions for Sustainable Remanufacturing, Machines 2023, 11 (5), 538; https://doi.org/10.3390/machines11050538 |
2.899 Q2 |
40 |
Naser A Alsaleh, Sabbah Ataya, Fahamsyah H Latief, Mohamed MZ Ahmed, Ahmed Ataya, Akrum Abdul-Latif, LCF and HCF of Short Carbon Fibers Reinforced AE42 Mg Alloy, Materials 2023, 16(10), 3686; https://doi.org/10.3390/ma16103686 |
3.748 Q1 |
39 |
Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites, Polymers 2023, 15(8), 1897; https://doi.org/10.3390/polym15081897 |
4.967 Q1 |
38 |
Rashid Khan, Sabbah Ataya, Islam Elgammal, Khamis Essa, Reduced Slit Rolling Power in Rebar Steel Production, Materials 2023, 16(5), 2104; https://doi.org/10.3390/ma16052104 |
3.748 Q1 |
37 |
Mohamed MZ Ahmed, Ahmed RS Essa, Sabbah Ataya, Mohamed M El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Joffin J Ponnore, Abdelkarim YA Mohamed, Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties, Materials 2023, 16(5), 2031; https://doi.org/10.3390/ma16052031 |
3.748 Q1 |
36 |
Mohamed Abd Elaziz, Mahmoud Ahmadein, Sabbah Ataya, Naser Alsaleh, Agostino Forestiero, Ammar H Elsheikh: A Quantum-Based Chameleon Swarm for Feature Selection, Mathematics (2022), 10(19), 3606; https://doi.org/10.3390/math10193606 |
2.59 |
35 |
Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Ahmed M Soliman, Naser A Alsaleh, Mohamed IA Habba: Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short Carbon Fibers, Materials (2022),15(14), 4841; https://doi.org/10.3390/ma15144841 |
3.748 Q1 |
34 |
Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Yousef GY Elshaghoul, Mohamed IA Habba: Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers, Materials (2022), 15(14), 4818;https://doi.org/10.3390/ma15144818 |
3.748 Q1 |
33 |
Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed MZ Ahmed, Ahmed MM Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed IA Habba: The Additive Manufacturing of Aluminum Matrix Nano Al2O3 Composites Produced via Friction Stir Deposition Using Different Initial Material Conditions, Materials (2022), 15(8), 2926; https://doi.org/10.3390/ma15082926 |
3.748 Q1 |
32 |
Sabbah Ataya, Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef GY Elshaghoul, Mohamed IA Habba: Effective Range of FSSW Parameters for High Load-Carrying Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints, Materials (2022), 15(4), 1394; https://doi.org/10.3390/ma15041394 |
3.748 Q1 |
31 |
Mohamed I. A. Habba Mohamed M. Z. Ahmed,Khalil Hajlaoui, Mohamed M. El-Sayed Seleman, Mahmoud F. Elkady, Sabbah Ataya,Fahamsyah H. Latief, Mohamed I. A. Habba, Microstructure and Mechanical Properties of Friction Stir Welded 2205 Duplex Stainless Steel Butt Joints, Materials (2021), 14(21), 6640; https://doi.org/10.3390/ma14216640 |
3.748 Q1 |
30 |
Mohamed MZ Ahmed, Mohamed IA Habba, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily, Bobbin Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process Parameters on Temperature Distribution and Joints’ Properties, Materials (2021), 14(16), 4585; https://doi.org/10.3390/ma14164585 |
3.748 Q1 |
29 |
MMZ Ahmed, B Alzahrani, N Jouini, MM Hessien, S Ataya, The Role of Orientation and Temperature on the Mechanical Properties of a 20 Years Old Wind Turbine Blade GFR Composite, Polymers 13 (2021), 1144. Doi: https://doi.org/10.3390/polym13071144 |
3.426 Q1 |
28 |
M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, A. Mahdy, N. A. Alsaleh, E. Ahmed, Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020. Metals 2021, 11, 68. doi: 10.3390/met11010068 |
2.117 Q1 |
27 |
M.M.Z. Ahmed, M.M. El-Sayed Seleman, Z. Zidan, R. M. Ramadan, S. Ataya, N. A. Alsaleh, Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints. Metals 2021, 11, 128. doi: 10.3390/met11010128 |
2.117 Q1 |
26 |
M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, T. Allam, N. A. Alsaleh, E. Ahmed, Grain Structure, Crystallographic Texture, and Hardening Behavior of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14. Metals (2021), 11 (181. doi: 10.3390/met11020181 |
2.117 Q1 |
25 |
A Bakkar, S Ataya, O. Badr, Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer, Journal of Petroleum and Mining Engineering 22 (2020) 21-25. DOI: 10.21608/jpme.2020.22711.1023 |
NA |
24 |
|
1.805 Q2 |
23 |
Ashraf Bakkar, Mohamed Ahmed, Naser Alsaleh, Mohamed Alnagar, Sabbah Ataya, Microstructure, Wear, and Corrosion Characterization of High TiC Content Inconel 625 Matrix Composites, Journal of Materials Research and Technology 8 (2019) 1102-1110. https://doi.org/10.1016/j.jmrt.2018.09.001 |
3.398 Q1 |
22 |
Sabbah Ataya, Naser Alsaleh, Mohamed M. El-Sayed Seleman, Strength and Wear Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers, Acta Metallurgica Sinica (English Letters) 32 (2019) 31-40. https://doi.org/10.1007/s40195-018-0771-z |
1.341 Q2 |
21 |
Mohamed M. El-Sayed Seleman, Mohamed M.Z. Ahmed, Sabbah Ataya, Microstructure and Mechanical Properties of Hot Extruded 6016 Aluminum Alloy/Graphite Composites, J. Mate. Sci. and Technol, 34 (2018) 1580-1591. DOI: 10.1016/j.jmst.2018.03.004 |
2.764 Q1 |
20 |
M.M.Z. Ahmed, Sabbah Ataya, M.M. El-Sayed Seleman, H.R. Ammar, Essam Ahmed, Friction stir welding of similar and dissimilar AA7075 and AA5083, Journal of Materials Processing Technology 242 (2017) 77-91. DOI: 10.1016/j.jmatprotec.2016.11.024 |
3.147 Q1 |
19 |
Adel A. Abdel-Wahab, Sabbah Ataya, Vadim V. Silberschmidt, Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling, Polymer Testing 58 (2017) 86-95. DOI: 10.1016/j.polymertesting.2016.12.016 |
2.464 Q1 |
18 |
Ahmed E. Hannora, Sabbah Ataya, Structure and compression strength of hydroxyapatite/titania nanocomposites formed by high energy ball milling, Journal of Alloys and Compounds 658 (2016) 222-233. DOI: 10.1016/j.jmatprotec.2016.11.024 |
3.133 Q1 |
17 |
Ashraf Bakkar, Sabbah Ataya, Corrosion behaviour of stainless steel fibre-reinforced copper metal matrix composite with reference to electrochemical response of its constituents, Corrosion Science 85 (2014) 343-351. DOI: 10.1016/j.corsci.2014.04.037 |
4.422 Q1 |
16 |
Sabbah Ataya, Mohamed M.Z. Ahmed, Damages of wind turbine blade trailing edge: Forms, location, and root causes, Engineering Failure Analysis 35 (December 2013) 480-488. DOI: 10.1016/j.engfailanal.2013.05.011 |
1.13 Q1 |
15 |
S. Ataya, E. El-Magd: “Quasi-static behavior of Mg-alloys with and without short-fiber reinforcement”, J. Theoretical and Applied Fracture Mechanics, 47 (2007) 102-112. DOI: 10.1016/j.tafmec.2006.11.002 |
2.097 Q1 |
14 |
M. Korthäuer, S. Ataya, E. El-Magd: “Effects of the deformed volume, volume fraction, and particle size of the deformation behavior of W/Cu composites”, J. Theoretical and applied fracture mechanics, 46 (2006) 38-45. DOI: 10.1016/j.tafmec.2006.05.002 |
2.097 Q1 |
13 |
T. Sadowski, S. Ataya, K. Nakonieczny: Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side – Comparison of two applied methods for problem solution, J. Computational Materials Science, Vol. 45 (2009) 624-632. DOI: 10.1016/j.commatsci.2008.07.011 |
2.376 Q2 |
12 |
S. Ataya, E. El-Magd: “Modeling the creep behavior of Mg alloys with and without short-fiber reinforcement”, J. Computational Materials Science, 39 (2007) 155-159. DOI: 10.1016/j.commatsci.2006.03.020 |
2.376 Q2 |
11 |
M. Korthäuer, S. Ataya, A. Salem, E. El-Magd: “Size effects on the deformation behaviour of W-Cu composites under shear loading”, J. Computational Materials Science, 39 (2007) 219-223. |
2.376 Q2 |
10 |
S. Ataya, M. Korthäuer, E. El-Magd: Effects of the deformed volume and the volume fraction on the local deformation behavior of W/Cu composites, Key Eng. Mater. 345-346 (2007) pp 1205-1208. DOI: 10.4028/www.scientific.net/KEM.345-346.1205 |
0.224 Q3 |
9 |
M. Harhash, S. Ataya, M. Abd El Hady, N. El Mahallawy, Microstructural characterization and kinetics of diffusion bonded AZ31/Al by hot press cladding, Materialswissenschaft und Werkstofftechnick 45 (2014) 15-20. DOI: 10.1002/mawe.201400194 |
0.524 Q4 |
8 |
M. Korthäuer, S. Ataya, E. El-Magd: “Scaling effects on the deformation behaviour of W/Cu composite materials under dynamic loading”, J. Phys. IV France 134 (2006) 157-162. DOI: 10.1051/jp4:2006134024 |
0.35 Q4 |
7 |
Mohamed H. Safa, Sabbah Ataya, Rashad M. Ramadan, Samir Ibrahim, Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel, J. Pet. & Min. Eng. 20 (1) (2017). |
National journal |
6 |
I. I. Elgammal, S. Ataya, R. M. Ramadan, G. Megahed, Modification of the bar slitting roll pass design using FE simulation, J. Pet. & Min. Eng. 19 (2) (2016) |
National journal |
5 |
Ahmed Refaee, Sabbah Ataya, Samir Ibrahim, Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties, J. Pet. & Min. Eng. 17 (1) (2014) 47-53 |
National journal |
4 |
Ahmed El-Kawas, Sabbah Ataya, Samir Ibrahim, Industrial Production of Fine Grained Ferrite in Low-Carbon Steel, J. Pet. & Min. Eng. 17 (1) (2014) 16-23 |
National journal |
3 |
Sabbah Ataya, M.M.Z. Ahmed, Essam Ahmed, An Investigation of Damages in Low Power Wind Turbine Blades, Journal of Petroleum and Mining Engineering 16 (2) (2013) |
National journal |
2 |
M. Seleman, and S. Ataya "Microstructure and Wear Behavior of Mg-Alloy AE42 Reinforced with 23 VOL. % Carbon Short Fibers" J. Petr. Min. Eng, 14 (1) (2011) 59-72. |
National journal |
1 |
S. Eassa, S. Ataya, R. Ramadan and M. Elzeky, Low Cycle Bending Fatigue Behavior of Aluminum Alloy 5083 in Air and in 3.5% NaCl Solution, J. Petr. Min. Eng, 13 (1) (2010) 83-99 |
National journal |
Conference papers (12)
(7) Book and Book chapters
Total Journal papers (54)
# |
Publications |
Impact factor |
54 |
Ibrahim Sari, Mahmoud Ahmadein, Sabbah Ataya, Lakhdar Hachani, Kader Zaidat, Nashmi Alrasheedi, Menghuai Wu and Abdellah Kharicha, Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate, Materials 2023, 16(21), |
3.4 Q2 |
53 |
Xu Song, Naser Alsaleh, D. Thresh kumar, Murugesan Palaniappan, Abdullah Abdullatif Aly Elfar, Sabbah Ataya, Enabling customer participation for the implementation of sustainable manufacturing, Journal of Cleaner Production, 2024, 140803, https://doi.org/10.1016/j.jclepro.2024.140803.
|
11.1, Q1 |
52 |
Mohamed M. El-Sayed Seleman, Sabbah Ataya, Hayam A. Aly, Barun, Haldar, Naser A. Alsaleh, Mohamed M. Z. Ahmed, Ashraf Bakkar, Khaled M.Ibrahim Effect of Si Content on the Dry and Wet Sliding Wear Behavior of the Developed Ti-15Mo-(0-2) Si Alloys for Biomedical Applications, Metal 2023, 13(11), 1861; https://doi.org/10.3390/met13111861 |
2.9 Q2 |
51 |
Nashmi H Alrasheedi, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Sabbah Ataya, Fatigue and Fracture Behaviors of Short Carbon Fiber Reinforced Squeeze Cast AZ91 at 20° C and 250° C, Crystals 2023, 13(10), 1469; https://doi.org/10.3390/cryst13101469 |
2.7 Q2 |
50 |
Naser A Alsaleh, Akrum Abdul-Latif, Fahamsyah H Latief, Mohamed MZ Ahmed, Sabbah Ataya, Plastic Behavior of Metals and Their Sensitivity to Grain Size: Comparison between Two Multiscale Approaches, Crystals 2023, 13(10), 1463; https://doi.org/10.3390/cryst13101463 |
2.7 Q2 |
49 |
Mahmoud Ahmadein, Naser A Alsaleh, Mahmoud Ahmed Elsayed, Sabbah Ataya, Analysis of the Effect of Simultaneous Melt Shearing and Cooling on Grain Formation and Rheology of A356 Aluminum Alloy, Crystals 2023, 13(9), 1345; https://doi.org/10.3390/cryst13091345 |
2.7 Q2 |
48 |
H illol . Joardar, Nitai .Sundaor S. Das, Barun . Haldar, Kalipada. P. Maity, Naser Abdulrahman Alsaleh and Sabbah Ataya, An Upper Bound Energy Formulation of Free-Chip Machining with Flat Chips and an Alternative Method of Determination of Cutting Forces without Using the Merchant’s Circle Diagram, Machines 2023, 11(9), 853; https://doi.org/10.3390/machines11090853 |
2.899 Q2 |
47 |
Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Sabbah Ataya, Mohamed MZ Ahmed, Khamis Essa, Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion, Micromachines 2023, 14(8), 1642; https://doi.org/10.3390/mi14081642 |
3.4 Q2 |
46 |
Solomon Bayu Huluka, Rachid Baleh, Naser A Alsaleh, Adel Alfozan, Akrum Abdul-Latif, Sabbah Ataya, Effect of a Multiaxial Load of Reverse Torsion on Open-Cell Aluminum Foams Behavior, Materials 2023, 16(14), 5136; https://doi.org/10.3390/ma16145136 |
3.4 Q2 |
45 |
Mohamed IA Habba, Naser A Alsaleh, Takwa E Badran, Mohamed M El-Sayed Seleman, Sabbah Ataya, Ahmed E El-Nikhaily, Akrum Abdul-Latif, Mohamed MZ Ahmed, Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect, Materials 2023, 16(14), 5124; https://doi.org/10.3390/ma16145124 |
3.4 Q2 |
44 |
Naser A Alsaleh, Mohamed M El-Sayed Seleman, Ahmed MM Hassan, Mohamed MZ Ahmed, Sabbah Ataya, Fahamsyah H Latief, Akrum Abdul-Latif, Mohamed IA Habba, Additively Manufactured Parts from AA2011-T6 Large-Diameter Feedstocks Using Friction Stir Deposition, Materials 2023, 16(14), 4904; https://doi.org/10.3390/ma16144904 |
3.4 Q2 |
43 |
Nashmi H Alrasheedi, Sabbah Ataya, Mohamed M El-Sayed Seleman, Mohamed MZ Ahmed, Tensile Deformation and Fracture of Unreinforced AZ91 and Reinforced AZ91-C at Temperatures up to 300 °C, Materials 2023, 16(13), 4785; https://doi.org/10.3390/ma16134785 |
3.4 Q2 |
42 |
Alessandro Abena, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Hybrid Finite Element–Smoothed Particle Hydrodynamics Modelling for Optimizing Cutting Parameters in CFRP Composites, Polymers 2023, 15(13), 2789; https://doi.org/10.3390/polym15132789 |
4.967 Q1 |
41 |
Ho Lam Au-Yeung, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A. Alsaleh, Mohamed M. Z. Ahmed, and Khamis Essa, Non-Destructive Disassembly of Interference Fit under Wear Conditions for Sustainable Remanufacturing, Machines 2023, 11 (5), 538; https://doi.org/10.3390/machines11050538 |
2.899 Q2 |
40 |
Naser A Alsaleh, Sabbah Ataya, Fahamsyah H Latief, Mohamed MZ Ahmed, Ahmed Ataya, Akrum Abdul-Latif, LCF and HCF of Short Carbon Fibers Reinforced AE42 Mg Alloy, Materials 2023, 16(10), 3686; https://doi.org/10.3390/ma16103686 |
3.748 Q1 |
39 |
Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed MZ Ahmed, Khamis Essa, Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites, Polymers 2023, 15(8), 1897; https://doi.org/10.3390/polym15081897 |
4.967 Q1 |
38 |
Rashid Khan, Sabbah Ataya, Islam Elgammal, Khamis Essa, Reduced Slit Rolling Power in Rebar Steel Production, Materials 2023, 16(5), 2104; https://doi.org/10.3390/ma16052104 |
3.748 Q1 |
37 |
Mohamed MZ Ahmed, Ahmed RS Essa, Sabbah Ataya, Mohamed M El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Joffin J Ponnore, Abdelkarim YA Mohamed, Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties, Materials 2023, 16(5), 2031; https://doi.org/10.3390/ma16052031 |
3.748 Q1 |
36 |
Mohamed Abd Elaziz, Mahmoud Ahmadein, Sabbah Ataya, Naser Alsaleh, Agostino Forestiero, Ammar H Elsheikh: A Quantum-Based Chameleon Swarm for Feature Selection, Mathematics (2022), 10(19), 3606; https://doi.org/10.3390/math10193606 |
2.59 |
35 |
Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Ahmed M Soliman, Naser A Alsaleh, Mohamed IA Habba: Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short Carbon Fibers, Materials (2022),15(14), 4841; https://doi.org/10.3390/ma15144841 |
3.748 Q1 |
34 |
Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed MZ Ahmed, Khalil Hajlaoui, Yousef GY Elshaghoul, Mohamed IA Habba: Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers, Materials (2022), 15(14), 4818;https://doi.org/10.3390/ma15144818 |
3.748 Q1 |
33 |
Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed MZ Ahmed, Ahmed MM Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed IA Habba: The Additive Manufacturing of Aluminum Matrix Nano Al2O3 Composites Produced via Friction Stir Deposition Using Different Initial Material Conditions, Materials (2022), 15(8), 2926; https://doi.org/10.3390/ma15082926 |
3.748 Q1 |
32 |
Sabbah Ataya, Mohamed MZ Ahmed, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef GY Elshaghoul, Mohamed IA Habba: Effective Range of FSSW Parameters for High Load-Carrying Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints, Materials (2022), 15(4), 1394; https://doi.org/10.3390/ma15041394 |
3.748 Q1 |
31 |
Mohamed I. A. Habba Mohamed M. Z. Ahmed,Khalil Hajlaoui, Mohamed M. El-Sayed Seleman, Mahmoud F. Elkady, Sabbah Ataya,Fahamsyah H. Latief, Mohamed I. A. Habba, Microstructure and Mechanical Properties of Friction Stir Welded 2205 Duplex Stainless Steel Butt Joints, Materials (2021), 14(21), 6640; https://doi.org/10.3390/ma14216640 |
3.748 Q1 |
30 |
Mohamed MZ Ahmed, Mohamed IA Habba, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily, Bobbin Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process Parameters on Temperature Distribution and Joints’ Properties, Materials (2021), 14(16), 4585; https://doi.org/10.3390/ma14164585 |
3.748 Q1 |
29 |
MMZ Ahmed, B Alzahrani, N Jouini, MM Hessien, S Ataya, The Role of Orientation and Temperature on the Mechanical Properties of a 20 Years Old Wind Turbine Blade GFR Composite, Polymers 13 (2021), 1144. Doi: https://doi.org/10.3390/polym13071144 |
3.426 Q1 |
28 |
M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, A. Mahdy, N. A. Alsaleh, E. Ahmed, Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020. Metals 2021, 11, 68. doi: 10.3390/met11010068 |
2.117 Q1 |
27 |
M.M.Z. Ahmed, M.M. El-Sayed Seleman, Z. Zidan, R. M. Ramadan, S. Ataya, N. A. Alsaleh, Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints. Metals 2021, 11, 128. doi: 10.3390/met11010128 |
2.117 Q1 |
26 |
M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, T. Allam, N. A. Alsaleh, E. Ahmed, Grain Structure, Crystallographic Texture, and Hardening Behavior of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14. Metals (2021), 11 (181. doi: 10.3390/met11020181 |
2.117 Q1 |
25 |
A Bakkar, S Ataya, O. Badr, Failure analysis of heat exchanger tubes of Ni-200 alloy in a titanium tetrachloride vaporizer, Journal of Petroleum and Mining Engineering 22 (2020) 21-25. DOI: 10.21608/jpme.2020.22711.1023 |
NA |
24 |
|
1.805 Q2 |
23 |
Ashraf Bakkar, Mohamed Ahmed, Naser Alsaleh, Mohamed Alnagar, Sabbah Ataya, Microstructure, Wear, and Corrosion Characterization of High TiC Content Inconel 625 Matrix Composites, Journal of Materials Research and Technology 8 (2019) 1102-1110. https://doi.org/10.1016/j.jmrt.2018.09.001 |
3.398 Q1 |
22 |
Sabbah Ataya, Naser Alsaleh, Mohamed M. El-Sayed Seleman, Strength and Wear Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers, Acta Metallurgica Sinica (English Letters) 32 (2019) 31-40. https://doi.org/10.1007/s40195-018-0771-z |
1.341 Q2 |
21 |
Mohamed M. El-Sayed Seleman, Mohamed M.Z. Ahmed, Sabbah Ataya, Microstructure and Mechanical Properties of Hot Extruded 6016 Aluminum Alloy/Graphite Composites, J. Mate. Sci. and Technol, 34 (2018) 1580-1591. DOI: 10.1016/j.jmst.2018.03.004 |
2.764 Q1 |
20 |
M.M.Z. Ahmed, Sabbah Ataya, M.M. El-Sayed Seleman, H.R. Ammar, Essam Ahmed, Friction stir welding of similar and dissimilar AA7075 and AA5083, Journal of Materials Processing Technology 242 (2017) 77-91. DOI: 10.1016/j.jmatprotec.2016.11.024 |
3.147 Q1 |
19 |
Adel A. Abdel-Wahab, Sabbah Ataya, Vadim V. Silberschmidt, Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling, Polymer Testing 58 (2017) 86-95. DOI: 10.1016/j.polymertesting.2016.12.016 |
2.464 Q1 |
18 |
Ahmed E. Hannora, Sabbah Ataya, Structure and compression strength of hydroxyapatite/titania nanocomposites formed by high energy ball milling, Journal of Alloys and Compounds 658 (2016) 222-233. DOI: 10.1016/j.jmatprotec.2016.11.024 |
3.133 Q1 |
17 |
Ashraf Bakkar, Sabbah Ataya, Corrosion behaviour of stainless steel fibre-reinforced copper metal matrix composite with reference to electrochemical response of its constituents, Corrosion Science 85 (2014) 343-351. DOI: 10.1016/j.corsci.2014.04.037 |
4.422 Q1 |
16 |
Sabbah Ataya, Mohamed M.Z. Ahmed, Damages of wind turbine blade trailing edge: Forms, location, and root causes, Engineering Failure Analysis 35 (December 2013) 480-488. DOI: 10.1016/j.engfailanal.2013.05.011 |
1.13 Q1 |
15 |
S. Ataya, E. El-Magd: “Quasi-static behavior of Mg-alloys with and without short-fiber reinforcement”, J. Theoretical and Applied Fracture Mechanics, 47 (2007) 102-112. DOI: 10.1016/j.tafmec.2006.11.002 |
2.097 Q1 |
14 |
M. Korthäuer, S. Ataya, E. El-Magd: “Effects of the deformed volume, volume fraction, and particle size of the deformation behavior of W/Cu composites”, J. Theoretical and applied fracture mechanics, 46 (2006) 38-45. DOI: 10.1016/j.tafmec.2006.05.002 |
2.097 Q1 |
13 |
T. Sadowski, S. Ataya, K. Nakonieczny: Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side – Comparison of two applied methods for problem solution, J. Computational Materials Science, Vol. 45 (2009) 624-632. DOI: 10.1016/j.commatsci.2008.07.011 |
2.376 Q2 |
12 |
S. Ataya, E. El-Magd: “Modeling the creep behavior of Mg alloys with and without short-fiber reinforcement”, J. Computational Materials Science, 39 (2007) 155-159. DOI: 10.1016/j.commatsci.2006.03.020 |
2.376 Q2 |
11 |
M. Korthäuer, S. Ataya, A. Salem, E. El-Magd: “Size effects on the deformation behaviour of W-Cu composites under shear loading”, J. Computational Materials Science, 39 (2007) 219-223. |
2.376 Q2 |
10 |
S. Ataya, M. Korthäuer, E. El-Magd: Effects of the deformed volume and the volume fraction on the local deformation behavior of W/Cu composites, Key Eng. Mater. 345-346 (2007) pp 1205-1208. DOI: 10.4028/www.scientific.net/KEM.345-346.1205 |
0.224 Q3 |
9 |
M. Harhash, S. Ataya, M. Abd El Hady, N. El Mahallawy, Microstructural characterization and kinetics of diffusion bonded AZ31/Al by hot press cladding, Materialswissenschaft und Werkstofftechnick 45 (2014) 15-20. DOI: 10.1002/mawe.201400194 |
0.524 Q4 |
8 |
M. Korthäuer, S. Ataya, E. El-Magd: “Scaling effects on the deformation behaviour of W/Cu composite materials under dynamic loading”, J. Phys. IV France 134 (2006) 157-162. DOI: 10.1051/jp4:2006134024 |
0.35 Q4 |
7 |
Mohamed H. Safa, Sabbah Ataya, Rashad M. Ramadan, Samir Ibrahim, Processing and Evaluation of Ferritic-Bainitic Multi-phase Steel, J. Pet. & Min. Eng. 20 (1) (2017). |
National journal |
6 |
I. I. Elgammal, S. Ataya, R. M. Ramadan, G. Megahed, Modification of the bar slitting roll pass design using FE simulation, J. Pet. & Min. Eng. 19 (2) (2016) |
National journal |
5 |
Ahmed Refaee, Sabbah Ataya, Samir Ibrahim, Effect of Dual Phase Steel Processing Conditions on the Microstructure and Mechanical Properties, J. Pet. & Min. Eng. 17 (1) (2014) 47-53 |
National journal |
4 |
Ahmed El-Kawas, Sabbah Ataya, Samir Ibrahim, Industrial Production of Fine Grained Ferrite in Low-Carbon Steel, J. Pet. & Min. Eng. 17 (1) (2014) 16-23 |
National journal |
3 |
Sabbah Ataya, M.M.Z. Ahmed, Essam Ahmed, An Investigation of Damages in Low Power Wind Turbine Blades, Journal of Petroleum and Mining Engineering 16 (2) (2013) |
National journal |
2 |
M. Seleman, and S. Ataya "Microstructure and Wear Behavior of Mg-Alloy AE42 Reinforced with 23 VOL. % Carbon Short Fibers" J. Petr. Min. Eng, 14 (1) (2011) 59-72. |
National journal |
1 |
S. Eassa, S. Ataya, R. Ramadan and M. Elzeky, Low Cycle Bending Fatigue Behavior of Aluminum Alloy 5083 in Air and in 3.5% NaCl Solution, J. Petr. Min. Eng, 13 (1) (2010) 83-99 |
National journal |
Conference papers (12)
(7) Book and Book chapters