• Head of Mechanical Engineering Department, Faculty of Engineering, Suez University.

1. Associate Professor, Mechanical Engineering Department, Faculty of Engineering, Pharos University in Alexandria, Egypt, part-time, from Oct. 2023 to now.
2. Associate Professor, Mechanical Engineering Department (Mechanical Design and Production Engineering Division), Faculty of Engineering, Suez University, Egypt, from Dec. 2019 to now.
3. Assistant Professor, Mechanical Engineering Department (Mechanical Design and Production Engineering Division), Faculty of Engineering, Suez University, Egypt, from Aug. 2017 to Dec. 2019.
4. Assistant Professor, Mechanical Engineering Department (Mechanical Design and Production Engineering Division), Faculty of Engineering, Helwan University, Egypt, from Jan. 2015 to Aug. 2017.
5. Assistant Professor, Mechanical Engineering Department, Higher Technological Institute, Tenth of Ramadan City, Egypt, part-time, from Oct. 2016 to Jan. 2017.
6. Assistant Professor, Manufacturing Engineering & Production Technology Department, Modern Academy for Engineering and Technology, Egypt, full-time, from Oct. 2014 till Jan. 2015.
7. Researcher, Casting Technology Laboratory, Central Metallurgical Research and Development Institute (CMRDI), Egypt, from Nov. 2006 to Oct. 2014.

1. Head of Mechanical Engineering Department, Faculty of Engineering, Suez University, from Sep. 2023 to now.
2. Vice Dean for Community Service and Environmental Development, Faculty of Engineering, Suez University, from Oct. 2020 to Aug. 2022.
3. Head of Mechanical Engineering Department, Faculty of Engineering, Suez University, from Oct. 2020 to Aug. 2021.

23.  Received the title of Associate Professor from the Permanent Scientific Committee of Manufacturing Engineering and Mechanical Design, Higher Supreme Council of Universities with a score of 90.37 points on 25-12-2019.
23. Ph.D. Degree, (March 2014), Department of Metallurgy, Faculty of Engineering, Cairo University, Egypt.
    • Thesis Title: "Optimization of Properties in Ti-6Al-4V Alloy Castings and Weldments".
23.  M.Sc. Degree, (Jan. 2010), Department of Metallurgy, Faculty of Engineering, Cairo University, Egypt.
    • Thesis Title: "Optimizing Abrasion Wear Resistance and Impact Toughness of Chromium-Molybdenum White Irons".
24. B.Sc. Degree, (May 2006), Metallurgical & Materials Science Engineering Department, Faculty of Petroleum & Mining Engineering, Suez University, Egypt.
    • Grade: Very Good (the 3^rd order in the department).

1. Association of University Technology Managers (AUTM) Membership, from Oct. 2023 till now.
2. Member of the University's Innovators Support Center, Suez University, from Feb. 2023 till now.
3. Member of the University's Technological Incubator, Suez University, from Feb. 2023 till now.
4. Member of Arab Foundation of Young Scientist, from Sept. 2022 till now.
5. Member of the National Scientific Network of Foundry Industry (NSNFI), Academy of Scientific Research and Technology (ASRT), Ministry of Scientific Research, Egypt, from Jan. 2021 till now.
6. Member of Ranking Unit of Universities, Suez University, from Nov. 2018 till now.
7. Member of Central Workshops Unit, Suez University, from Dec. 2018 till Dec. 2019.
8. Member of Industrial Technology Research Council, Specialized Councils Sector, Academy of Scientific Research and Technology (ASRT), Ministry of Scientific Research, Egypt, from Nov. 2015 till May 2018.
9. Member in the Scientific Research Quality Standard, Quality Assurance Unit, Faculty of Engineering, Helwan University, from Oct. 2015 till Aug. 2017.
10. Member of the Committee of Exhibitions and Conferences, CMRDI, from Oct. 2011 till Dec. 2014.
11. Member of Egyptian Engineering Syndicate, Egypt, from 2006 till now.

• Member in Egypt-US Cooperation Program, Technology Transfer Training Program, Science & Technology Development Fund (STDF), Oct. (2023).
• Scientific Excellence Award - Suez University, (2023).
• Ph.D. scholarship subsidized by Supporting Master and Doctoral Degrees Grants, Academy of Scientific Research and Technology (ASRT), Ministry of Scientific Research:  - Budget: 100,000 L.E.                                                           - Period: Ended in March 2014.

23. Data Science and Machine Learning diploma, Ai Academy, (Jan. 2024 till now)
23. Arduino & Electronics, Orbit, (Oct. 2023 till now).
23. ANSYS, Engineering and others academy, (Jan. to March. 2023).
23. Vibration Analysis, Engineers Syndicate in Suez, (Sept. 2022).
23. Scival, Suez University, (March. 2019).
23. Scientific research ethics, Suez University, (Jul. 2018).
23. Management of the research team, Suez University, (Jul. 2018).
23. Systems of credit hours, Suez University, (Jun. 2018).
23. Making decisions and solving problems, Suez University, (Feb. 2018).
23.  Effective presentation skills, Suez University, (Nov. 2017).
23.  Academic guidance and student support, Suez University, (Nov. 2017).
23.  SolidWorks, Engineers Syndicate, (March 2017).
23.  ABAQUS- Finite Element Analysis, (April 2016).
23.  Non-Destructive Testing Course (NDT), SNT-TC-1A, Level II, (Feb. 2014):

[Welding Technology- Liquid Penetrant Test (PT)- Magnetic Particle Test (MT)- Ultrasonic Test (UT)- Radiographic Test (RT)- Visual Inspection (VT)]

23.  Heat Treatment of Ferrous & Non-ferrous Materials, CMRDI, (2008).

1. Reham Reda, Yasmeen Ahmed, Islam Magdy, Hossam Nabil, Mennatullah Khamis, Mohamed Abo Lila, Ahmed Refaey, Nada Eldabaa, Manar Abo Elmagd, Adham E. Ragab, Ahmed Elsayed, “Wall Panel Structure Design Optimization of a Hexagonal Satellite”, Heliyon, accepted, (2024).
2. Yousef G. Y. Elshaghoul, Mohamed M. El-Sayed Seleman, Ashraf Bakkar, Sarah A. Elnekhaily, Ibrahim Albaijan, Mohamed M. Z. Ahmed, Abdou Abdel Samad, Reham Reda, “Additive friction stir deposition of AA7075-T6 alloy: impact of process parameters on the microstructures and properties of the continuously deposited multilayered parts”, Applied Sciences, MDPI, 13, 10255, (2023).
3. Reham Reda, Yasmeen Ahmed, Islam Magdy, Hossam Nabil, Mennatullah Khamis, Ahmed Refaey, Manar Abo Elmagd, Nada Eldabaa, Mohamed Abo Lila, Hady Ergawy, Alhussein Elgarf, Gerges Abed, “Basic Principles and Mechanical Considerations of Satellites: A Short Review”, Transactions on Aerospace Research, Vol. 272, No. (3), 40-54, (2023).
4. Eman El-Shenawy, Ahmed I. Z. Farahat, Adham E. Ragab, Ahmed Elsayed, Reham Reda, “Flow Behavior and Mechanical Properties of Multi-Pass Thermomechanically Processed 7075 Al-Alloy”, Metals, MDPI, 13, 1158, (2023).
5. Mervat Ibrahim, Reham Reda, "Tailoring the Composition of the Functional Cu-Cr-Zr-La/Ce Alloys for Electromechanical Applications", Materials Science and Technology (United Kingdom), Taylor & Francis, Vol. 39, No. (2), 209–235, (2023).
6. Eman El-Shenawy, Hussein Mohamed, Reham Reda, "Effect of Hot Rolling Strategy on the Mechanical Behavior and Productivity of Ti-6Al-4V Alloy", Materials, MDPI, 15(23), 8344, (2022).
7. Mervat Ibrahim, Mohamed E. Moussa, Reham Reda, "Upgrading the Performance of Functional Cu-Cr-Zr Alloys for Resistance Welding Electrodes", Materials Science and Technology (United Kingdom), Taylor & Francis, Vol. 38, No. 8, 484–498, (2022).
8. Reham Reda, Mohamed Magdy, Mohamed Rady, “Ti–6Al–4V TIG Weld Analysis Using FEM Simulation and Experimental Characterization”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Springer Nature, Vol. 44, Number 3, P: 765–782, (2020).
9. Reham Reda, “Constrained Groove Pressing (CGP): Die Design, Materials Processing and Mechanical Characterization”, Fluid Dynamics and Materials Processing, Tech Science Press, Vol. 15, No. 3, P: 171-185, (2019).
10. Eman El-Shenawy, Reham Reda, “Optimization of TMCP strategy for microstructure refinement and flow-productivity characteristics enhancement of low carbon steel”, Journal of Materials Research and Technology, Elsevier, Vol. 8, Issue 3, P: 2819–2831, (2019).

23. Co-Principle investigator (Co-PI) of project title:
    • “Development of Cu-Cr-Zr Alloy for Electro-Mechanical Applications”, budget of 192,000 L.E., from March 2019 to March 2o21.
23. Co-Principle investigator (Co-PI) of project title:
    • “Optimizing the Rolling Strategy to Upgrade the Mechanical Performance of Ti-6Al-4V Alloy in Industrial Applications”, budget of 192,000 L.E., from March 2019 to March 2021.
23. Principle investigator (PI) of project title:
    • “Optimizing the Properties of Cast Ti-6Al-4V Bio-Alloy by Single and Duplex Stage Heat Treatment for Medical Applications”, budget of 100,000 L.E., from Jan. 2014 to Dec. 2014.

23.  Supervisor of two graduation projects, Faculty of Engineering- Helwan University, subsidized by Supporting Graduation Projects Grants, Academy of Scientific Research and Technology (ASRT), Ministry of Scientific Research [Acceptance Date: March 2016- Ended in Dec. 2016]:

1. Project Title: “Effect of Different Welding Processes on the Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel”.                               - Budget: 60,000 L.E.
2. Project Title: “Evaluating the Deformation Behavior and Formability of Low Carbon Steel Sheets”.                                               

- Budget: 40,000 L.E.

23.  Member in a project supported by Helwan University:

• Project Title: “Establishment of a Nanotechnology Center at Helwan University”
• My role in the Project:

• Search for price offers for laboratory equipment.
• Member of the committees for determining tenders, envelopes opening, make decisions and examination.
• Organization of training courses for the project’s staff.

23.  Participated in a project in CMRDI financed by Research Development and Innovation (RDI) Programme, EU-Egypt Innovation Fund (EEIF):

• Project Title: “Complete production of innovated and value-added metallic and plastic medical implants”
• My role in the Project:

• Monitoring and participating in the production of Ti-6Al-4V implants (knee and hip joint) by investment casting technique.
• Investigation of investment cast Ti-6Al-4V implants (hip joint and knee).

23.  Participation in a work in CMRDI in collaboration with SEBMATEC (The Egyptian-German Company for Engineering Industries and Professional Welding), aims at studying the weldability of austembered ductile iron (ADI).

 Participating in a work in CMRDI in collaboration with United Company for Foundries (U.C.F.), aims at upgrading service performance of high Cr white irons grinding media for cement and mineral processing industries through enhancing impact toughness and wear resistance at acceptable cost.